Completed amps from Fender, Orange, Hiwatt, Vox, etc.
Moderator: VelvetGeorge
-
NY Chief
- Wiki Editor
- Posts: 6589
- Joined: Thu Apr 28, 2005 6:02 pm
- Location: SoCal
Post
by NY Chief » Sat Feb 20, 2010 7:24 pm
So I decided to drop a Weber speaker in the little champ. (Same speaker as the one included in the Merc Magnetics upgarde kit) I dropped it in and.... no sound!
I haven't used this amp in quite a while and didn't try it before I changed the speaker so I don't know when it might have quit working. I put the old speaker back and swapped out tubes still nothing. I'm getting over 6 volts heater voltage to both tubes. Anybody have a voltage chart for this guy? Any suggestions?
Some pics...
NY Chief 5-0, transplanted in SoCal
"Book 'em, Dan-o!"
-
NY Chief
- Wiki Editor
- Posts: 6589
- Joined: Thu Apr 28, 2005 6:02 pm
- Location: SoCal
Post
by NY Chief » Sun Feb 21, 2010 12:57 am
Thanks, Smokey! I think I found R10 smoked. Will replace it tomorrow and see what I get. Very helpful!
NY Chief 5-0, transplanted in SoCal
"Book 'em, Dan-o!"
-
Smokin Tone
- Senior Member
- Posts: 168
- Joined: Wed Feb 01, 2006 8:31 pm
Post
by Smokin Tone » Sun Feb 21, 2010 2:18 am
You're welcome chief. Smoked a 2 watter, you should check that 6V6 and make sure it's not the culprit. Check R26 as well.
-
NY Chief
- Wiki Editor
- Posts: 6589
- Joined: Thu Apr 28, 2005 6:02 pm
- Location: SoCal
Post
by NY Chief » Sun Feb 21, 2010 12:07 pm
Thanks again, Smokey!
I did read somewhere (here, I think) that the EH 6V6's caused someone similar trouble. Will check R26 also. Gotta run down to rat shack for an R replacememt.
NY Chief 5-0, transplanted in SoCal
"Book 'em, Dan-o!"
-
NY Chief
- Wiki Editor
- Posts: 6589
- Joined: Thu Apr 28, 2005 6:02 pm
- Location: SoCal
Post
by NY Chief » Sun Feb 21, 2010 12:09 pm
Thanks again, Smokey!
I did read somewhere (here, I think) that the EH 6V6's caused someone similar trouble. Will check R26 also. Gotta run down to rat shack for an R replacememt.
NY Chief 5-0, transplanted in SoCal
"Book 'em, Dan-o!"
-
Smokin Tone
- Senior Member
- Posts: 168
- Joined: Wed Feb 01, 2006 8:31 pm
Post
by Smokin Tone » Sun Feb 21, 2010 1:33 pm
Keep us posted on how you make out.
-
NY Chief
- Wiki Editor
- Posts: 6589
- Joined: Thu Apr 28, 2005 6:02 pm
- Location: SoCal
Post
by NY Chief » Sun Feb 21, 2010 5:01 pm
Of course Shit Shack does not stock a 2 watt, 470ohm.
And George doesn't have any listed in the store. This is gonna become another one of the those endless 5 minute fix jobs. I can see it already.....
BTW, the schem calls out a Fr470 resistor. What does "Fr" mean? It looks like plain metal oxide R.
NY Chief 5-0, transplanted in SoCal
"Book 'em, Dan-o!"
-
Smokin Tone
- Senior Member
- Posts: 168
- Joined: Wed Feb 01, 2006 8:31 pm
Post
by Smokin Tone » Sun Feb 21, 2010 7:37 pm
Looks like the Fr question was answered in the other thread. I can check and see if I have one I can send to you Chief. Also Hoffman has some 3W metal film.
http://www.hoffmanamps.com/
-
NY Chief
- Wiki Editor
- Posts: 6589
- Joined: Thu Apr 28, 2005 6:02 pm
- Location: SoCal
Post
by NY Chief » Sun Feb 28, 2010 8:18 pm
That was it! Changed out R10 AND the 6v6. Didn't want to even give a bad 6V6 an option of taking out the resistor again. Very cool little amp Communication Breakdown tone!
Thanks for your help, Smokey!
NY Chief 5-0, transplanted in SoCal
"Book 'em, Dan-o!"
-
Smokin Tone
- Senior Member
- Posts: 168
- Joined: Wed Feb 01, 2006 8:31 pm
Post
by Smokin Tone » Tue Mar 02, 2010 7:01 pm
Nice work Chief. Glad she's screamin for ya.
![Cool 8)](./images/smilies/icon_cool.gif)
-
worldoftone
- Senior Member
- Posts: 886
- Joined: Fri Aug 25, 2006 11:07 am
- Just the numbers in order: 13492
- Location: Left Coast, USA
-
Contact:
Post
by worldoftone » Tue Mar 02, 2010 11:07 pm
If you ever need parts like that call me. I've got bins (literally) of 470s.
- WOT
I smell tubes.
-
worldoftone
- Senior Member
- Posts: 886
- Joined: Fri Aug 25, 2006 11:07 am
- Just the numbers in order: 13492
- Location: Left Coast, USA
-
Contact:
Post
by worldoftone » Tue Mar 02, 2010 11:08 pm
Oh yeah . . . EH tubes = JUNK
- WOT
I smell tubes.
-
NY Chief
- Wiki Editor
- Posts: 6589
- Joined: Thu Apr 28, 2005 6:02 pm
- Location: SoCal
Post
by NY Chief » Wed Mar 03, 2010 9:37 pm
worldoftone wrote:If you ever need parts like that call me. I've got bins (literally) of 470s.
- WOT
Thanks, Ross (but I'm waiting on the next old strat to go on the block
![Very Happy :D](./images/smilies/icon_biggrin.gif)
!!!)
NY Chief 5-0, transplanted in SoCal
"Book 'em, Dan-o!"
-
worldoftone
- Senior Member
- Posts: 886
- Joined: Fri Aug 25, 2006 11:07 am
- Just the numbers in order: 13492
- Location: Left Coast, USA
-
Contact:
Post
by worldoftone » Thu Mar 04, 2010 10:20 am
Nothing too old, but I have a '80 Capri Orange I'm thinking of selling. Possibly a '74 in Black and an '81 Sienna Burst. Both of these really should have seom new frets put in. We'll see how it goes. Played my '66 out last night. Oh yeah, that one isn't getting sold anytime soon
- WOT
I smell tubes.