Head Cab Front Panel

This is what it sounds like, when cones cry.

Moderators: VelvetGeorge, BUG

Post Reply
Wattever
Senior Member
Posts: 138
Joined: Fri Mar 04, 2011 6:56 pm
Just the numbers in order: 7

Head Cab Front Panel

Post by Wattever » Thu Jan 25, 2018 6:50 am

Could someone please tell me the correct way to attach the front panel on a Marshall style head cab.

I can see that the back panels just screw on with exposed head screws, but what about the fronts? I can't imagine them holding with screws from behind just going into the 3/8 Baltic birch.

The only solution I can think of is something like the wood/machine screw combination studs that some manufacturers use for mounting speakers.

TIA

Wattever
Senior Member
Posts: 138
Joined: Fri Mar 04, 2011 6:56 pm
Just the numbers in order: 7

Re: Head Cab Front Panel

Post by Wattever » Tue Jan 30, 2018 5:55 pm

It's REALLY hard to believe that no-one here has ever taken the front off a Marshall head cab, or at least noticed what kind of fasteners are holding it on from inside the back. :bang:

User avatar
neikeel
Senior Member
Posts: 6990
Joined: Tue Dec 06, 2005 8:31 am
Location: Suffolk, England

Re: Head Cab Front Panel

Post by neikeel » Fri May 18, 2018 10:13 am

The front panels are held on by screws that go through the internal battens which are drilled and countersunk and into the front panel using Pozidrive screws direct into the wood of the front panel. No glue. The panels are a snug fit with the gold tadpole piping.
Nothing complicated.
Main thing is to ensure the screws are not too long.
Neil

Post Reply