4 ohms wears tubes faster ?

This is what it sounds like, when cones cry.

Moderators: VelvetGeorge, BUG

Post Reply
User avatar
thegame
New Member
Posts: 21
Joined: Fri Oct 03, 2008 10:38 pm
Location: Kan eh ? duh !

4 ohms wears tubes faster ?

Post by thegame » Thu Jan 25, 2018 8:49 pm

Assuming one is running a 4 ohm load (either a single 4 ohm cab, two 8 ohm cabs, or even four 16 ohm cabs paralleled down to 4) and the amp is set accordingly to 4 ohms, does this place more stress on the tubes and wear them faster ?

If so, could one then assume a matched (amp set to 8 into an 8 ohm cab) setting of 8 ohms wears tubes faster than a matched 16 ohm settting ?

Thanks

gloeidraad
Senior Member
Posts: 66
Joined: Sat Oct 27, 2012 2:57 am
Just the numbers in order: 13492

Re: 4 ohms wears tubes faster ?

Post by gloeidraad » Fri Jan 26, 2018 7:56 am

No. If the impendance is set correct it makes no differance on the tube wear.

Post Reply