Got my new speakers today

flemingmras · Post by **flemingmras** » Tue Jun 08, 2004 1:43 pm

4 G12H-30s for my new slant replica cab that I ordered.

Now George, where's that post regarding the correct way to break in new speakers?

Jon

Post by **VelvetGeorge** » Tue Jun 08, 2004 1:45 pm

http://www.metroamp.com/forum/viewtopic.php?t=188

flemingmras · Post by **flemingmras** » Tue Jun 08, 2004 2:49 pm

OK cool. However, instead of a variac, I figure I'll load them in the cab and run a 60Hz 100mV signal into the amp input and hook mycabinet and my DVM up to the speaker jacks, then turn the volume up until the voltage across the cab euqals that of the value I got from the calculator on that page(around 12.6 volts on 16 ohm G12H-30s).

Jon

Post by **VelvetGeorge** » Tue Jun 08, 2004 3:00 pm

Bake on HIGH for 45 minutes while basting continually. Rotate at least once.
Allow to cool for 5 minutes before serving.

4x12 serves up to 100 people, depending on serving size.

George

flemingmras · Post by **flemingmras** » Thu Jun 17, 2004 1:08 pm

BTW guys, I'm running one of my G12H-30s on the Variac right now at 12.6 volts, and it's not lout at all. I mean, u can hear it but it's not loud.

Jon

johniss0001 · Post by **johniss0001** » Thu Jun 17, 2004 4:01 pm

hey guys check the mojo look on these speakers.

They are exactly like mine except they are in a totally different cab and those speakers sound great.

Do any of you guys know what they are all I know is I think they are Rola Celestions but i ain't sure.

John Ross

boogies are shite
http://i9.ebayimg.com/01/i/01/e2/0e/de_1.JPG