KT66 clearance issue (build now complete)

Madditch · Post by **Madditch** » Wed Aug 18, 2010 7:27 pm

I'm using a Mojo chassis and MC trannys, the PT is bigger than what the chassis was punched for so I had to make some adjustments. After fitting everything together and moving both trannys, I am only able to get about 2-2.5mm clearance between the tubes and the transformers.(See pic.) Will there be any issues having the KT66s this close to the trannys?

Woolly Mammoth · Post by **Woolly Mammoth** » Wed Aug 18, 2010 8:13 pm

That does not look like a MetroAmp 45 kit.
Is this posted in the wrong spot ?

DAVE

Flames1950 · Post by **Flames1950** » Wed Aug 18, 2010 11:12 pm

As to the question though, KT66's are always a snug fit and your situation isn't uncommon. No problems in any amp I've ever built with KT66's.

Madditch · Post by **Madditch** » Thu Aug 19, 2010 9:32 am

Great, thanks! I will move on with the build.

Madditch · Post by **Madditch** » Sat Sep 04, 2010 4:20 pm

Just finished her, it sounds amazing so the proximity of the KT66s to the transformers is definitely a non issue. Thanks for the help. Here are some gut shots.

Flames1950 · Post by **Flames1950** » Sat Sep 04, 2010 6:25 pm

Nice job!!

Metropoulos Forum

KT66 clearance issue (build now complete)

KT66 clearance issue (build now complete)

Re: KT66 clearance issue

Re: KT66 clearance issue

Re: KT66 clearance issue

Re: KT66 clearance issue (build complete)

Re: KT66 clearance issue (build now complete)