Page 1 of 1
Got my new speakers today
Posted: Tue Jun 08, 2004 1:43 pm
by flemingmras
4 G12H-30s for my new slant replica cab that I ordered.
Now George, where's that post regarding the correct way to break in new speakers?
Jon
Posted: Tue Jun 08, 2004 1:45 pm
by VelvetGeorge
Posted: Tue Jun 08, 2004 2:49 pm
by flemingmras
OK cool. However, instead of a variac, I figure I'll load them in the cab and run a 60Hz 100mV signal into the amp input and hook mycabinet and my DVM up to the speaker jacks, then turn the volume up until the voltage across the cab euqals that of the value I got from the calculator on that page(around 12.6 volts on 16 ohm G12H-30s).
Jon
Posted: Tue Jun 08, 2004 3:00 pm
by VelvetGeorge
Bake on HIGH for 45 minutes while basting continually. Rotate at least once.
Allow to cool for 5 minutes before serving.
4x12 serves up to 100 people, depending on serving size.
George
Posted: Thu Jun 17, 2004 1:08 pm
by flemingmras
BTW guys, I'm running one of my G12H-30s on the Variac right now at 12.6 volts, and it's not lout at all. I mean, u can hear it but it's not loud.
Jon
Posted: Thu Jun 17, 2004 4:01 pm
by johniss0001
hey guys check the mojo look on these speakers.
They are exactly like mine except they are in a totally different cab and those speakers sound great.
Do any of you guys know what they are all I know is I think they are Rola Celestions but i ain't sure.
John Ross
boogies are shite
http://i9.ebayimg.com/01/i/01/e2/0e/de_1.JPG
