I found these on ebay, i am going to retube my amp and start from scratch and see if i can find any problems ( other than me)
tell me what u think
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... RK:MEWA:IT
would i need to modify my tube sockets
Moderator: VelvetGeorge
-
johniss0001
- Senior Member
- Posts: 1404
- Joined: Tue Mar 16, 2004 5:03 pm
- Just the numbers in order: 7
- Location: Hove England
- Contact:
would i need to modify my tube sockets
John Ross
Respect the FATHER OF LOUD Jim Marshall
Respect the FATHER OF LOUD Jim Marshall
-
novosibir
- Senior Member
- Posts: 4654
- Joined: Tue Nov 22, 2005 2:32 pm
- Just the numbers in order: 7
- Location: Nuernberg, Germany
- Contact:
Not only the pinout is different to a 12AX7, also the electrically parameters!
Keep off! You can't use this tubes in any Marshall, Fender, XYZ, aso.
Larry
Keep off! You can't use this tubes in any Marshall, Fender, XYZ, aso.
Larry
The fault almost always is sitting in front of the amp 
Larry's Website now with included Pix's Gallery
Larry's Website now with included Pix's Gallery