I've built several different head cabs however I've never built a small box plexi box. The plans I was given show 1/2 inch but not the type. I'm sure Baltic Birch will be fine and I have tones of 1/2 out in the shop. I'd love to not have to go buy another 5'x5' piece of 3/4 if I can get away with it.
Were the small box plexi's made with 1/2 inch?
Thanks
Keith
http://www.keithshapiro.com/audio" onclick="window.open(this.href);return false;
Small box thickness
Moderators: VelvetGeorge, BUG
-
- New Member
- Posts: 3
- Joined: Thu Feb 21, 2008 11:32 pm
- Location: Colorado Springs Colorado
- Contact:
-
- Senior Member
- Posts: 166
- Joined: Tue Sep 22, 2009 11:24 pm
- Just the numbers in order: 7
- Location: Fort Collins, CO
Re: Small box thickness
Vintage 4x12s are 5/8" so I doubt they built any headcabs out of 3/4". Use the 1/2" you'll only have nominal differences with the bevel on the edges.
So you think your Mesa-Boogie is cool? You won't even be able to hear it over my Marshall Superlead
- 62sg
- Senior Member
- Posts: 766
- Joined: Fri Jul 29, 2005 9:02 pm
- Just the numbers in order: 13492
- Location: BAY CITY, MICHIGAN
- Contact: