Metropoulos Forum

I've built several different head cabs however I've never built a small box plexi box. The plans I was given show 1/2 inch but not the type. I'm sure Baltic Birch will be fine and I have tones of 1/2 out in the shop. I'd love to not have to go buy another 5'x5' piece of 3/4 if I can get away with it.

Were the small box plexi's made with 1/2 inch?

Thanks
Keith
http://www.keithshapiro.com/audio" onclick="window.open(this.href);return false;

Vintage 4x12s are 5/8" so I doubt they built any headcabs out of 3/4". Use the 1/2" you'll only have nominal differences with the bevel on the edges.

They are 11 ply 5/8".