Page 1 of 1
The Celestion G12H-30's: 75hz & 55hz in the same cabinet
Posted: Sun May 12, 2013 8:44 pm
by Majorlead78
Has anybody blended both the 75hz & the 55hz Celestion G12H-30s in a single 4x12 cabinet? If anyone has done this, what are the advantages & disadvantages of blending these speakers? I was thinking about doing this with my 1970 Marshall 4x12 angled cabinet. Putting the 75hz on top & the 55hz on the bottom. Opinions welcomed.
David
Re: The Celestion G12H-30's: 75hz & 55hz in the same cabinet
Posted: Sun May 12, 2013 8:52 pm
by Scumback Speakers
I do this on one of my old slant basketweave cabs, using 8 ohm G12H30 pre rolas. No issues mixing them. You just get a little more bass from the 55hz speakers in the bottom.
Re: The Celestion G12H-30's: 75hz & 55hz in the same cabinet
Posted: Mon May 13, 2013 6:03 am
by bill bokey
I'm thinking of doing the same with 2xT1511 and 2xT1221. Jim, do you have both bass cone speakers at the bottom and lead on top ?
Re: The Celestion G12H-30's: 75hz & 55hz in the same cabinet
Posted: Mon May 13, 2013 6:08 am
by Scumback Speakers
Usually I have the 55hz/bass cones at the bottom. I used to recommend an X pattern, but have concluded the 75hz on top is more of what guitar players want to hear than the 55hz.
Re: The Celestion G12H-30's: 75hz & 55hz in the same cabinet
Posted: Mon May 13, 2013 6:39 am
by bill bokey
Thanks Jim
