Marshall 11" Logo Drill Template

This is what it sounds like, when cones cry.

Moderators: VelvetGeorge, BUG

Post Reply
rmroza
New Member
Posts: 18
Joined: Thu Jun 17, 2010 11:28 am
Just the numbers in order: 7

Marshall 11" Logo Drill Template

Post by rmroza » Thu Aug 10, 2017 3:15 pm

All

I have a blank headbox and need to drill it for the 11" Marshall logo.

There is a thread that supports the 6"viewtopic.php?f=14&t=32352&p=464997&hil ... go#p464997, but that doesn't do me any good.

I've looked all over and even touched base with George, but to no avail.

As the 11" is used on both cabinets and head boxes, it would amaze me if anyone did not come up with a CAD/template for it and as indicated in other threads, it's not so simple as putting ink on the bottom of the pegs and making a template. The 11" is flimsy and flexes. If you want the lettering staright, you NEED a template.

Please advise and where I may procure this and thanks in advance.

Robb

Post Reply