JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Moderator: VelvetGeorge
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
JTM 45 amp kit instructions ***UPDATED*** Oct 2008
JTM 45 kit instructions. 26Mb download in pdf format.
http://metroamp.com/downloads/JTM_45_KIT_V2.1.pdf" onclick="window.open(this.href);return false;
May 2014, I stuck this file in Dropbox.
https://dl.dropboxusercontent.com/u/646 ... CTIONS.pdf
george
http://metroamp.com/downloads/JTM_45_KIT_V2.1.pdf" onclick="window.open(this.href);return false;
May 2014, I stuck this file in Dropbox.
https://dl.dropboxusercontent.com/u/646 ... CTIONS.pdf
george
Last edited by VelvetGeorge on Thu Aug 07, 2008 3:48 pm, edited 5 times in total.
- csteward
- Senior Member
- Posts: 80
- Joined: Sat Nov 25, 2006 7:00 pm
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Thanks for the Update George
-
- Senior Member
- Posts: 2161
- Joined: Fri Aug 03, 2007 8:45 am
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Thanks worked great. I'll tell ya the split turretts are VERY enjoyable to work with. It's also easy to do a nice neat job with them!
69 SuperBass Plexi
12000 Series Bulid
73 1987
68 Nos 50 build
2554 Combo
2550 Silver Jub stack
71 LesPaul Deluxe
68,71,73 4x12
12000 Series Bulid
73 1987
68 Nos 50 build
2554 Combo
2550 Silver Jub stack
71 LesPaul Deluxe
68,71,73 4x12
-
- New Member
- Posts: 1
- Joined: Fri Jan 09, 2009 7:05 am
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Is there any other way to get these instructions... my computer will not pull up that page for some reason...
-
- Senior Member
- Posts: 1136
- Joined: Wed Jul 12, 2006 1:50 pm
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Tried downloading the instructions this morning, and it's a no-go......it starts, but stops at about 850Kb.
Same with the 50 watt instructions..no-go.
Same with the 50 watt instructions..no-go.
-
- Administrator
- Posts: 372
- Joined: Sun Sep 07, 2008 2:01 pm
- Just the numbers in order: 7
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Did you get the file? I tested it and it seems to be working. It's a big download, it will take some time.PCollen wrote:Tried downloading the instructions this morning, and it's a no-go......it starts, but stops at about 850Kb.
Same with the 50 watt instructions..no-go.
-
- New Member
- Posts: 3
- Joined: Sun Feb 05, 2017 6:16 am
- Just the numbers in order: 13492
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Ok I think I'm going nuts, I cannot see an instruction to attach the 1K 2W resistor to either the board or the output tubes. I mean I know where it has to go, but its driving me crazy
-
- Senior Member
- Posts: 1099
- Joined: Tue Sep 10, 2013 9:09 pm
- Just the numbers in order: 13492
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Are you positive that it's a 2 watt resistor? They usually include 1k/5 watt cement resistors in most kits for the power tube screens. They are soldered across pins 4 and 6 of each power tube socket with the feed wire connecting to pin 6. I'm not sure where a single 1k/ 2 watt may be needed though.
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Some amps use a flying 1k resistor from the turret on the B+ line from the choke to V4 instead of a yellow screens supply. I have it on both my 64 and 65 JTM45s, only brings screen V down a little extra but in these amps sounds spot on.
Neil
-
- Senior Member
- Posts: 1099
- Joined: Tue Sep 10, 2013 9:09 pm
- Just the numbers in order: 13492
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Gotcha... I really need to build a JTM 45 one day soon. It's the only circuit I haven't tried yet.
-
- New Member
- Posts: 5
- Joined: Wed Feb 21, 2018 6:02 pm
- Just the numbers in order: 13492
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Anyone have an active download for this? http://metroamp.com/downloads/JTM_45_KIT_V2.1.pdf
Link is broken.
Link is broken.
-
- Senior Member
- Posts: 1099
- Joined: Tue Sep 10, 2013 9:09 pm
- Just the numbers in order: 13492
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Here you go. Valvestorm has a good link at the top of their JTM 45 build checklist page.
http://valvestorm.com/sites/default/fil ... T_V2.1.pdf
http://valvestorm.com/JTM45%20Kit
http://valvestorm.com/sites/default/fil ... T_V2.1.pdf
http://valvestorm.com/JTM45%20Kit
-
- New Member
- Posts: 2
- Joined: Sat Dec 17, 2022 1:11 pm
- Just the numbers in order: 13492
Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008
Hi George,
I have a JTM45 which I wish to install the ZL-FX board I recently purchased. I see links here to instructions (web link and a dropbox link) but both appear to be not working. Can you point me to these instructions ?
Thanks in advance,
Pete DeSisto
Order Confirmation #QG8LFJFJV
I have a JTM45 which I wish to install the ZL-FX board I recently purchased. I see links here to instructions (web link and a dropbox link) but both appear to be not working. Can you point me to these instructions ?
Thanks in advance,
Pete DeSisto
Order Confirmation #QG8LFJFJV