Page 1 of 1

JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Tue Aug 09, 2005 7:30 pm
by VelvetGeorge
JTM 45 kit instructions. 26Mb download in pdf format.

http://metroamp.com/downloads/JTM_45_KIT_V2.1.pdf" onclick="window.open(this.href);return false;


May 2014, I stuck this file in Dropbox.

https://dl.dropboxusercontent.com/u/646 ... CTIONS.pdf



george

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Sat Nov 01, 2008 1:22 pm
by csteward
Thanks for the Update George

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Mon Nov 03, 2008 7:52 pm
by beaulieu
Thanks worked great. I'll tell ya the split turretts are VERY enjoyable to work with. It's also easy to do a nice neat job with them!

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Sat Jan 10, 2009 11:45 am
by hippie
Is there any other way to get these instructions... my computer will not pull up that page for some reason...

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Sat Sep 04, 2010 9:44 am
by PCollen
Tried downloading the instructions this morning, and it's a no-go......it starts, but stops at about 850Kb.
Same with the 50 watt instructions..no-go.

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Wed Sep 22, 2010 11:46 am
by admin
PCollen wrote:Tried downloading the instructions this morning, and it's a no-go......it starts, but stops at about 850Kb.
Same with the 50 watt instructions..no-go.
Did you get the file? I tested it and it seems to be working. It's a big download, it will take some time.

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Tue Mar 21, 2017 5:11 pm
by Tinners1983
Ok I think I'm going nuts, I cannot see an instruction to attach the 1K 2W resistor to either the board or the output tubes. I mean I know where it has to go, but its driving me crazy

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Wed Mar 22, 2017 5:07 pm
by danman
Are you positive that it's a 2 watt resistor? They usually include 1k/5 watt cement resistors in most kits for the power tube screens. They are soldered across pins 4 and 6 of each power tube socket with the feed wire connecting to pin 6. I'm not sure where a single 1k/ 2 watt may be needed though.

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Wed Mar 22, 2017 6:40 pm
by neikeel
Some amps use a flying 1k resistor from the turret on the B+ line from the choke to V4 instead of a yellow screens supply. I have it on both my 64 and 65 JTM45s, only brings screen V down a little extra but in these amps sounds spot on.

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Thu Mar 23, 2017 4:54 pm
by danman
Gotcha... I really need to build a JTM 45 one day soon. It's the only circuit I haven't tried yet. :thumbsup:

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Thu Dec 19, 2019 2:40 am
by Gorilla72
Anyone have an active download for this? http://metroamp.com/downloads/JTM_45_KIT_V2.1.pdf

Link is broken.

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Sat Dec 21, 2019 5:58 pm
by danman
Here you go. Valvestorm has a good link at the top of their JTM 45 build checklist page.

http://valvestorm.com/sites/default/fil ... T_V2.1.pdf

http://valvestorm.com/JTM45%20Kit

Re: JTM 45 amp kit instructions ***UPDATED*** Oct 2008

Posted: Tue Jan 03, 2023 10:56 am
by 62Plexi
Hi George,

I have a JTM45 which I wish to install the ZL-FX board I recently purchased. I see links here to instructions (web link and a dropbox link) but both appear to be not working. Can you point me to these instructions ?

Thanks in advance,
Pete DeSisto
Order Confirmation #QG8LFJFJV