Metropoulos Forum

HI guys,

i have not yet installed my Kt66 pair but....

i'm using PT magnetic components part 40-18033 and

is 485V too high on v6 pin 2 and 8?

This is infecting everything else too. For example pin1 on
V1 is 235v
V2 is 195v
V3 is 272.

I'm getting 3.35VAC on all the heaters.

on V4 and V5 pin 5 is getting -46.5.

shall i proceed and plug in my KT66 pair?

Are things ok?

Thanks for any help

michael

plugg in the tubes but watch the bias