Metropoulos Forum

Posted: **Mon Apr 30, 2012 1:50 pm**

What could cause the Normal Channel to stop working? Bright channel works great... I swapped the V1 preamp tube with the V2 and the Norm Ch still doesn't work but Bright Ch sounds good - there isn't even a "hiss" coming out of the speaker cab when only using the Norm Ch input (both hi and lo) . I've checked all the under board wiring / solder joints and all looks good. Tested the pot and it measures good as well.

Any ideas?

Posted: **Mon Apr 30, 2012 1:58 pm**

what's the amp? need pics of the inside

Posted: **Mon Apr 30, 2012 5:09 pm**

Figured it out...broken wire. My tired eyes didnt catch it

Posted: **Mon Apr 30, 2012 5:29 pm**

excellent. somewhere between the input jack and 1st valve?

Metropoulos Forum

Normal Channel not working...swapped out V1 tube but no luck

Normal Channel not working...swapped out V1 tube but no luck

Re: Normal Channel not working...swapped out V1 tube but no

Re: Normal Channel not working...swapped out V1 tube but no

Re: Normal Channel not working...swapped out V1 tube but no