Metroamp JCM800 2203 Kit for sale , More Info!!!
Moderator: VelvetGeorge
- Big Mike
- Senior Member
- Posts: 796
- Joined: Tue Oct 31, 2006 12:42 am
- Just the numbers in order: 7
- Location: East Bay California - Raider Nation
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
NICE! So are those going to be in JCM style head boxes, or late 70's style JMP's?
Sorry if this is redundant, the front panel looks too short for a JCM cab.
Sorry if this is redundant, the front panel looks too short for a JCM cab.
Metroamp kit JMP50 - CM OT
Metroamp JTM45 turned JMP50 w/Classictone OT
Marshall 2550 Jubilee
Powered by Thorn and Kauer guitars
Scumback Speakers
Metroamp JTM45 turned JMP50 w/Classictone OT
Marshall 2550 Jubilee
Powered by Thorn and Kauer guitars
Scumback Speakers
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
'76 -80 JMP type boxes.
VG
VG
- Big Mike
- Senior Member
- Posts: 796
- Joined: Tue Oct 31, 2006 12:42 am
- Just the numbers in order: 7
- Location: East Bay California - Raider Nation
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Sweet. Much better look.
Nice work George! Those are going to be whipass.
Nice work George! Those are going to be whipass.
Metroamp kit JMP50 - CM OT
Metroamp JTM45 turned JMP50 w/Classictone OT
Marshall 2550 Jubilee
Powered by Thorn and Kauer guitars
Scumback Speakers
Metroamp JTM45 turned JMP50 w/Classictone OT
Marshall 2550 Jubilee
Powered by Thorn and Kauer guitars
Scumback Speakers
- Guitar Adjuster
- Senior Member
- Posts: 1560
- Joined: Mon Oct 31, 2005 8:34 pm
- Location: San Antonio
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Will this be available as a "bare bones" kit with just the chassis, panels and board?
-
- Senior Member
- Posts: 86
- Joined: Tue Sep 09, 2008 9:33 pm
- Just the numbers in order: 7
- Location: Los Angeles, CA
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
This kit, along with the Lakers taking the NBA Championship, will make this June the best June in the history of time! Am I right? Haha!
(I'm also guessing this thread is the "official" 2203 Kit update thread)
(I'm also guessing this thread is the "official" 2203 Kit update thread)
"Seldom give unguarded advice, for advice is a dangerous gift, even from the wise to the wise, and all courses may run ill."
- jctaudiodesigns
- Senior Member
- Posts: 273
- Joined: Sun Sep 30, 2007 4:03 am
- Just the numbers in order: 7
- Location: Arizona
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Nice work George, you know I have been waiting for these for my students. Can't wait to see the final product!!!
"If your not learning, your not living"
JCT 8000 100 Watt
Boogie Mark 4
JCT 8000 100 Watt
Boogie Mark 4
-
- Senior Member
- Posts: 237
- Joined: Wed Sep 05, 2007 11:44 am
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Hi George, theoretically is it possible for one to make a switch for this amp that takes it between the jmp and jcm versions? Since from what I understand the only difference between these amps is a some kind of capacitor i think it was...on V1?
-
- Senior Member
- Posts: 237
- Joined: Wed Sep 05, 2007 11:44 am
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Is it possible to get a faceplate that doesnt say metro on it, for historical accuracy sake?
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Thanks all!
JCT: if you like how these turn out we can talk about how best to get these to your students.
Slashsound: you could put in a switch, but the change would be pretty subtle. If you go to the trouble to drill a hole and put a switch on there, IMO it's better served switching something with more tonal variation.
To answer your question, yes you can.
SS: Once the 2203 kits are rolling I intend to use our new aluminum panel resources to make restoration grade, accurate replacement panels for 70's JMP's. The caveat is that as of right now none of the samples are exact replicas of my original metal panels. We're very close, but not 100% as yet.
I'm diving into the kit assembly and instructions this week. I'll be posting updates and if all goes wel (and I'm happy with the results) I'll put these in the store for pre-sale in mid-April.
I'm still looking at mid-May for official release and shipping date.
George
JCT: if you like how these turn out we can talk about how best to get these to your students.
Slashsound: you could put in a switch, but the change would be pretty subtle. If you go to the trouble to drill a hole and put a switch on there, IMO it's better served switching something with more tonal variation.
To answer your question, yes you can.
SS: Once the 2203 kits are rolling I intend to use our new aluminum panel resources to make restoration grade, accurate replacement panels for 70's JMP's. The caveat is that as of right now none of the samples are exact replicas of my original metal panels. We're very close, but not 100% as yet.
I'm diving into the kit assembly and instructions this week. I'll be posting updates and if all goes wel (and I'm happy with the results) I'll put these in the store for pre-sale in mid-April.
I'm still looking at mid-May for official release and shipping date.
George
-
- New Member
- Posts: 7
- Joined: Mon Jan 12, 2009 4:13 am
- Location: Winnipeg Canada
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
this is so awesome!!
Bastardized '87 CSA Marshall 4212, '07 tiny terror, '60's Kiel modded by the late great Gar Gillies
-
- Senior Member
- Posts: 765
- Joined: Fri Jun 17, 2005 4:48 am
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
So, what are yall going to do with the extra preamp hole?
- MarshallGeek
- Senior Member
- Posts: 92
- Joined: Tue Feb 13, 2007 3:00 pm
- Location: The Netherlands
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Great work, that looks absolutely stunning! That amp looks amazing!VelvetGeorge wrote: SS: Once the 2203 kits are rolling I intend to use our new aluminum panel resources to make restoration grade, accurate replacement panels for 70's JMP's. The caveat is that as of right now none of the samples are exact replicas of my original metal panels. We're very close, but not 100% as yet.
George
I'm dying for a good resource for a front and back gold panel...
Will the restorating faceplates also carry the "JMP" text?
Salutes from the Netherlands!
New School, Old School, hell I don't go to school!!
'72 JMP 1959
'73 JMP 1959
'89 1962 metro PTP
'77 JMP 2203 metro PTP
'72 JMP 1959
'73 JMP 1959
'89 1962 metro PTP
'77 JMP 2203 metro PTP
-
- Senior Member
- Posts: 5054
- Joined: Thu Apr 13, 2006 1:36 pm
- Just the numbers in order: 7
- Location: Drontheim. Norwegen
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
A friend want me to build one of these for him. can't wait
http://www.myspace.com/20bonesband" onclick="window.open(this.href);return false;
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
I've made some progress on the kit and should have it listed for pre-sale later this week. It's going a little slower this time because I'm doing a few tasks, taking all the pictures then working on the steps. I got into trouble in the previous instructions by taking a bunch of pictures and assuming they would be good, only to find out later that I didn't have anything I could work with. I'm trying to avoid that this time of course.
I'm also trying to raise the bar a bit higher on these. Better pictures, more text dedicated to the options for the kit, more comparisons to the original 2203 included and so on.
More info and a sample of an instruction page will be posted soon....
VG
I'm also trying to raise the bar a bit higher on these. Better pictures, more text dedicated to the options for the kit, more comparisons to the original 2203 included and so on.
More info and a sample of an instruction page will be posted soon....
VG