What is the status on chassis?

Post by **VelvetGeorge** » Wed Aug 31, 2011 10:18 am

I need some 45 chassis for some builds and thought maybe it's time to offer a run on these. I could make 20-25 pieces available for sale. Would do panels too.

4-5 weeks lead time.

Please post if your interested. If there is sufficient demand I'll move forward.

George

OnTheFritz · Post by **OnTheFritz** » Fri Sep 02, 2011 10:26 pm

+1 for sure.

alchematic · Post by **alchematic** » Sat Sep 03, 2011 10:12 pm

I would take 2 sets of the chassis and faceplates. Any idea on cost? I was going to order a set from Ceriatone this week but would rather have your items. Happy to prepay if that helps!

502_6speed · Post by **502_6speed** » Sun Sep 04, 2011 7:33 am

I'll take one........

gtownblues · Post by **gtownblues** » Tue Sep 13, 2011 3:22 pm

I'm good for 2.

hourglass · Post by **hourglass** » Mon Sep 19, 2011 3:14 pm

Put me down for one.

Ryan

Smokin Tone · Post by **Smokin Tone** » Mon Oct 03, 2011 2:18 pm

McInrock · Post by **McInrock** » Tue Oct 04, 2011 5:04 pm

I'll take 1

Hail Satin · Post by **Hail Satin** » Fri Oct 07, 2011 3:38 am

Hey George

Question: Is the JTM 45 Chassis similar to the 50 watt plexi chassis?

If so, I'd be interested.

Thanks!

Joe

demonufo · Post by **demonufo** » Sat Oct 08, 2011 4:20 am

Extra tube socket hole for the rectifier.

neikeel · Post by **neikeel** » Sat Oct 08, 2011 1:59 pm

demonufo wrote:Extra tube socket hole for the rectifier.

Erm...............no

.

The small chassis has 3 9-pin preamp holes, two octal sized output valve holes and two holes to the right for either two filter cans (JMP50/2204) or a filter can and rectifier (JTM50 or JTM45). The hole sizes can be for either application and the mounting screw holes cover either option.

JMP73 · Post by **JMP73** » Sun Oct 09, 2011 2:53 am

I'll take 2 thanks.

demonufo · Post by **demonufo** » Sun Oct 09, 2011 6:48 am

neikeel wrote:
demonufo wrote:Extra tube socket hole for the rectifier.
Erm...............no .

The small chassis has 3 9-pin preamp holes, two octal sized output valve holes and two holes to the right for either two filter cans (JMP50/2204) or a filter can and rectifier (JTM50 or JTM45). The hole sizes can be for either application and the mounting screw holes cover either option.

Actually I could probably use one of these myself if the order hasn't already gone through. Got everything spare except a chassis, plates and a cab.

6burgh · Post by **6burgh** » Sun Oct 09, 2011 9:12 am

I replied to the other thread... but I'd buy two.

Hail Satin · Post by **Hail Satin** » Fri Oct 14, 2011 8:42 pm

Thanks for the replies all!

Just to make sure that my medication is not making me loopy:

I can use a jtm 45 chassis for a 50 watt plexi build, correct?

Thanks again

J

Metropoulos Forum

What is the status on chassis?

What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?

Re: What is the status on chassis?