Suitable replacement PT ?

All about iron and copper.

Moderator: VelvetGeorge

Post Reply
redozzman
Senior Member
Posts: 804
Joined: Sat Jan 20, 2007 12:48 am

Suitable replacement PT ?

Post by redozzman » Tue Aug 10, 2021 7:47 pm

Will the following PT specs work in a 69 100 watt Marshall metal panel amp.

org-0 red-120 plus 220-240 taps
reds-180v
red/blues-150v
red/yel-0
grn-grn/yel-grn 6.3VCT
blue-blue-100 bias.

Thanks for any input? This is a heyboer PT

danman
Senior Member
Posts: 1007
Joined: Tue Sep 10, 2013 9:09 pm
Just the numbers in order: 13492

Re: Suitable replacement PT ?

Post by danman » Fri Aug 13, 2021 6:58 pm

You didn't list the current rating on the high voltage secondary winding or the 6.3v winding. As long as the PT was intended for a 100 watter, this should be fine. The 180-0-180v winding will likely give you the final B+ that you normally see in your amp. The 150-0-150v winding gives you an option for lower B+ voltage should you want it.

User avatar
neikeel
Senior Member
Posts: 7225
Joined: Tue Dec 06, 2005 8:31 am
Location: Suffolk, England

Re: Suitable replacement PT ?

Post by neikeel » Wed Jan 12, 2022 3:15 pm

I agree with Danman

But overall looks suitable to me
Neil

Post Reply