Wiring diagram needed

All about iron and copper.

Moderator: VelvetGeorge

Post Reply
Robocop101985
New Member
Posts: 30
Joined: Mon May 28, 2012 2:09 am
Just the numbers in order: 7

Wiring diagram needed

Post by Robocop101985 » Tue Dec 19, 2023 6:08 pm

Anyone have the wiring diagram for the Metro Dagnall clone OT C1998? Build journal I’m referencing only uses the connections by color… not the value of the wire. The link is dead that’s in this thread. Any help would be appreciated. Thanks.

Tazin
Senior Member
Posts: 793
Joined: Fri Jan 19, 2007 8:54 pm

Re: Wiring diagram needed

Post by Tazin » Thu Jan 04, 2024 11:03 am

Primary Leads:
Brown: is for Valve #6 & #7 (Pin #3 on the octal sockets).
White: Center-tap.
Red: is for V4 & V5 (Pin #3 on the octal sockets.

Secondary Leads (self-lead; cloth covered):
Green: 16-ohm.
Yellow: 8-ohm.
Black: 4-ohm.
Brown: Common (negative; speaker jack).
Note: To ensure proper phasing of the output transformer, the 82K Phase Inverter plate resistor (pin #1 on pre-amp valve #3) feeds V4 & V5. The 100K Phase Inverter plate resistor (pin #6 on pre-amp valve #3) feeds V6 & V7.

jack1999
New Member
Posts: 16
Joined: Wed Sep 06, 2023 10:29 pm
Just the numbers in order: 13492

Re: Wiring diagram needed

Post by jack1999 » Wed Feb 21, 2024 9:30 pm

Hi, if you haven't found the answer yet, I think you can go to our website https://www.heisener.com/ to make a consultation, there are professional customer service to help you solve any problem you have.

Post Reply