Page 1 of 1
RS wiring ?
Posted: Sat Feb 10, 2007 5:35 pm
by darrell
How do you wire the thing up? There seems to be a few more wires then that of the Heyboer Output tranny. pic would help a hole bunch>
Posted: Sat Feb 10, 2007 5:43 pm
by Flames1950
Isn't the wiring diagram in the tech reference section yet?
You can't wire it to an impedance selector like a standard Heyboer replacement, you have to hardwire the wires together correctly to get the impedance you want.
Posted: Sat Feb 10, 2007 6:31 pm
by darrell
NO. Whats with all the striped wires?Can you use the Heyboer for el34 as well as kt66? if so I will send this RS back to george
Posted: Sat Feb 10, 2007 9:42 pm
by Flames1950
http://store.metroamp.com/product_info. ... cts_id=464
This shows the wiring connections for the different impedances.
You can use EL34's with either of the transformers -- IF you like the sound with the particular primary impedance. But you won't really know that without trying them........
Posted: Sat Feb 10, 2007 11:58 pm
by darrell
Im going to use the Heyboer Its easer to do and I dont have to take the amp apart to change impedance. If i can change to el34 if i want thats all im looking for. But more then likely I will stay Kt66I have some sylvanias and I also have some ge black plates on the way. I finaly got a hold of george( he said his baby is sick) and he's going to ship me another choke Monday. I have to laugh because I have been trying to get my parts stright for 3 weeks. I told George I had the worse luck when it comes to ordering stuff.. Hay Thanks for the Help guys And have a good one or a cold one or a good one with a cold one
Darrell