JCM2000 TSL OT Needed
Posted: Wed Aug 26, 2009 8:57 pm
I need to replace the OT in a JCM2000 TSL head. I have been looking all over the net for a direct replacement but haven't found one. Anybody have any idea where I can get one? Thanks! 
Metropoulos Forum
The place for vintage amp discussion.
https://forum.metropoulos.net/
JCM2000 TSL OT Needed
Page 1 of 1
Re: JCM2000 TSL OT Needed
Posted: Wed Aug 26, 2009 9:16 pm
Mercury Magnetics has a drop in replacement MAR100-OM.
Re: JCM2000 TSL OT Needed
Posted: Wed Aug 26, 2009 10:01 pm
Thanks. I know that tranny probably rocks but I was hoping to find the exact thing that is in there to dave a little dough. The amp is a buddy of mine's and he most likely won't drop the coin on that MM. He should though!stump wrote:Mercury Magnetics has a drop in replacement MAR100-OM.
Re: JCM2000 TSL OT Needed
Posted: Wed Aug 26, 2009 11:10 pm
Call CE tomorrow and see if Hammond makes a replacement.....
Re: JCM2000 TSL OT Needed
Posted: Thu Aug 27, 2009 12:49 am
CE offers 2 different 100 watt OT's that I think are correct for this amp and one of them is a Hammond. The other one says "Genuine Marshall" which I assume is a Dagnall since that is what the amp has in it. They both say "for JCM 900," though. I have been doing a bunch of research and it seems that the JCM 2000s and the 900s used the same OT, or at least very similar.
Re: JCM2000 TSL OT Needed
Posted: Thu Aug 27, 2009 8:15 pm
Is it the 100 watter or 60 watter?
Horizontal or vertical mount?
The P-TM9100O is listed as 100w for JCM 900 or JCM 2000.
Horizontal or vertical mount?
The P-TM9100O is listed as 100w for JCM 900 or JCM 2000.
Re: JCM2000 TSL OT Needed
Posted: Fri Aug 28, 2009 10:00 am
Aha! It is not listed like that on their wholesale website which is what I use, but it is on the tubesandmore site. Thanks!Structo wrote:Is it the 100 watter or 60 watter?
Horizontal or vertical mount?
The P-TM9100O is listed as 100w for JCM 900 or JCM 2000.