JTM45 OT options in europe

All about iron and copper.

Moderator: VelvetGeorge

Post Reply
LUC.key
New Member
Posts: 11
Joined: Tue Sep 05, 2006 5:34 am
Location: Roznov p/R CZ

JTM45 OT options in europe

Post by LUC.key » Wed Sep 02, 2009 2:08 pm

Hey all, I'm slowly getting parts for my JTM45 built and I'm lost when it comes to output transformer. What I can get locally is current Marshall reissue OT, some russian replacement (havent heard any good on those) and Hammond jtm45 ot. There also seems to be some 784-103 stlye OT on TAD, bit pricey though.
Well, nobody is going to reccomend me a stock Marshall one, russian replacement has bad rep, and I haven't found any information on Hammond. Do you euro guys know any other OT I should keep in mind? Most of the "famous" brands are from US and the shipping price plus tax is what bothers me.
Thanks for any input :)
Top
marvi180
New Member
Posts: 6
Joined: Sun Mar 22, 2009 2:57 pm
Just the numbers in order: 7

Re: JTM45 OT options in europe

Post by marvi180 » Wed Sep 02, 2009 3:35 pm

Hello

just connect Ingo at

http://www.ig-transformatoren.com

He has rewound my Drake 784-103 and he has all the correct datas. This was mine :D

http://www.ig-transformatoren.com/jtm_4 ... ormer.html

Kind regards
Marvin
Top
LUC.key
New Member
Posts: 11
Joined: Tue Sep 05, 2006 5:34 am
Location: Roznov p/R CZ

Re: JTM45 OT options in europe

Post by LUC.key » Fri Sep 04, 2009 3:47 am

Cool, thanks for the tip Marvin! :)
Top
Post Reply

Return to “Transformers and Chokes”