Fender DRRI PT, help needed!
Posted: Thu Mar 15, 2012 10:58 am
Hello guys,
i decided to convert my Fender Deluxe Reverb Reissue to ptp, while replacing the OT with a classictone at the same time. I decided to leave the stock pt though, as it seems adequate for the job. My question is this: the DRRI Service Manual shows the configuration for the export pt model. I live in Europe by the way, so my primary is 230V. I have drawn a scheme which i think is correct but i would like someone more knowledgeable than me to verify it before i continue. I have attached both the DRRI service manual and my drawing. Thanks a lot in advance!
Service manual: http://ampwares.com/schematics/65_Deluxe_Reverb_RI.pdf
My interpretation:![Image](http://farm8.staticflickr.com/7207/6838639770_6060231a14_z.jpg)
i decided to convert my Fender Deluxe Reverb Reissue to ptp, while replacing the OT with a classictone at the same time. I decided to leave the stock pt though, as it seems adequate for the job. My question is this: the DRRI Service Manual shows the configuration for the export pt model. I live in Europe by the way, so my primary is 230V. I have drawn a scheme which i think is correct but i would like someone more knowledgeable than me to verify it before i continue. I have attached both the DRRI service manual and my drawing. Thanks a lot in advance!
Service manual: http://ampwares.com/schematics/65_Deluxe_Reverb_RI.pdf
My interpretation:
![Image](http://farm8.staticflickr.com/7207/6838639770_6060231a14_z.jpg)