Marshall Transformers

All about iron and copper.

Moderator: VelvetGeorge

Post Reply
Mats A
Senior Member
Posts: 407
Joined: Mon Jan 14, 2008 5:32 pm
Location: Västerås Sweden

Marshall Transformers

Post by Mats A » Wed Nov 18, 2015 12:19 pm

I red somewhere that the 1959 SLP Reissues with the effects loop has some cheaper Chinese made transformer. Is that so? Where are the transformers in the Marshalls of today like the JVM and the other Reissues made? Before a Company called Dagnall used to make the transformers for the 100 Watters.

Mats A
Senior Member
Posts: 407
Joined: Mon Jan 14, 2008 5:32 pm
Location: Västerås Sweden

Re: Marshall Transformers

Post by Mats A » Thu Nov 26, 2015 3:13 pm

What number does the OT have in the Vintage Series 1959 SLP Reissue with effects loop? It´s not written on the schematic for that amp. It´s written on the HW, TT and JCM 800 2203 Reissue schematics.

danman
Senior Member
Posts: 1099
Joined: Tue Sep 10, 2013 9:09 pm
Just the numbers in order: 13492

Re: Marshall Transformers

Post by danman » Fri Nov 27, 2015 1:46 pm

I believe that Marshall still uses Dagnall in most of their amps bit I am not positive on that exact model. You may want to check over at http://www.marshallforum.com/ also.

Post Reply