I am building a 50 watt lead spec amp, using Metro build instructions, with parts from ValveStorm. I'm having trouble finding a turret board that I feel confident will work with the bridge rectifier and the split cathode provision. Does anyone have suggestions or success buying and using a turret board for this type of build; purchasing individual parts and not using a stock Metro Kit? It's nothing fancy just a basic JMP50 1987 lead spec 50 watter. I've looked at:
http://www.kurtsequipment.com/reproboards/" onclick="window.open(this.href);return false;
As close as they come is the Marshall JTM50 style board near the bottom of the page in either red or orange. The red one looks like the turret layout is very close to what I need.
Any suggestions and/or help is appreciated!
50 WATT BUILD KIT TURRET BOARD
Moderator: VelvetGeorge
-
- New Member
- Posts: 23
- Joined: Thu Jul 15, 2010 8:05 pm
- Just the numbers in order: 7
50 WATT BUILD KIT TURRET BOARD
Last edited by waggclan on Thu Dec 22, 2011 7:24 pm, edited 1 time in total.
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
Re: 50 WATT BUILD KIT TURRET BOARD
Brian will make one to however you want.
Tell him what it is for and what you want on the end beyond the bias circuit feed.
If you want the diodes on the end look at a build I did in his gallery, you can use it like this with or without snubber caps on the end too.
Tell him what it is for and what you want on the end beyond the bias circuit feed.
If you want the diodes on the end look at a build I did in his gallery, you can use it like this with or without snubber caps on the end too.
Neil
-
- New Member
- Posts: 23
- Joined: Thu Jul 15, 2010 8:05 pm
- Just the numbers in order: 7
Re: 50 WATT BUILD KIT TURRET BOARD
Thanks Neil. BTW, you do beautiful work!
Thanks,
Steve Wagg
Thanks,
Steve Wagg