JTM45/100 capacitor board layout
Posted: Fri Aug 19, 2005 12:07 am
Here's what I have for the common JTM 45/100 cap board. There are other layouts, I believe earlier than this.
George
George
Metropoulos Forum
The place for vintage amp discussion.
https://forum.metropoulos.net/
JTM45/100 capacitor board layout
Page 1 of 1
Posted: Fri Aug 19, 2005 11:45 pm
Thats's the board lay-out that Chris made for me George.
Posted: Mon Oct 24, 2005 1:45 pm
What is the dimensions of that board?
Posted: Tue Oct 25, 2005 10:55 am
4" x 6 1/4"
Posted: Wed Jan 11, 2006 11:16 am
regarding this board please see my post on the metroamp part of the forum
thanks
Neil
thanks
Neil
Re: JTM45/100 capacitor board layout
Posted: Thu Jun 08, 2006 9:34 am
the .5u cap between the diodes what voltage MIN rating is needed there. any sugetions on what cap to use there???VelvetGeorge wrote:Here's what I have for the common JTM 45/100 cap board. There are other layouts, I believe earlier than this.
George
Also is that a typo .05u as on The Metro Cd its .5u,
Can some one please confirm value and voltage please
Posted: Thu Jun 08, 2006 9:46 am
Yes it was a typo, and it was a buildo, until I fixed it.
The .05 should be at least 600v.
750 and 1000 are good too.
The .05 should be at least 600v.
750 and 1000 are good too.
Posted: Thu Jun 08, 2006 9:58 am
Thanksmightymike wrote:Yes it was a typo, and it was a buildo, until I fixed it.
The .05 should be at least 600v.
750 and 1000 are good too.
