Mercury Magnetics P4550JT-G2

Moderator: VelvetGeorge

Post Reply
User avatar
VelvetGeorge
Site Owner
Posts: 7233
Joined: Tue Oct 14, 2003 5:12 pm
Just the numbers in order: 13492
Location: The Murder Mitten
Contact:

Mercury Magnetics P4550JT-G2

Post by VelvetGeorge » Wed Jan 31, 2007 9:39 pm

MM P4550JT-G2. intended for JTM 45 and 50 watts.
Attachments
P4550JT-G2.gif
(9.41 KiB) Downloaded 6751 times
P4550JT-G2.pdf
(17.33 KiB) Downloaded 1401 times
Check out Plexi Replicas for my personal amp builds...
Image

User avatar
VelvetGeorge
Site Owner
Posts: 7233
Joined: Tue Oct 14, 2003 5:12 pm
Just the numbers in order: 13492
Location: The Murder Mitten
Contact:

Post by VelvetGeorge » Wed May 09, 2007 5:44 pm

It seems that MM has changed to terminals for some of the wires on this PT.

Here are a pic and a diagram for the new version.


george
Attachments
MM P4550JT-G2 dia.jpg
(76.83 KiB) Downloaded 6721 times
MM P4550JT-G2.jpg
(82.26 KiB) Downloaded 7758 times
Check out Plexi Replicas for my personal amp builds...
Image

User avatar
VelvetGeorge
Site Owner
Posts: 7233
Joined: Tue Oct 14, 2003 5:12 pm
Just the numbers in order: 13492
Location: The Murder Mitten
Contact:

Re: Mercury Magnetics P4550JT-G2

Post by VelvetGeorge » Mon Sep 22, 2008 12:58 pm

With regard to our JTM 45 kit:

Select the correct color primary wire for your operating voltage.

BLACK 117V

BROWN 220V

RED 230V

YELLOW 240V

The terminal labeled "COM" will replace the orange wire indicated in the instructions.

Terminals 9,10 and 11 correlate to the green heater wires. With 10 being the center tap which gets grounded.

Terminals 12 and 13 correlate to the yellow rectifier heater wires.

Terminals 6,7 and 8 correlate to the red high voltage wires. With 7 being the CT which goes to the fuse holder and then to ground.


George
Check out Plexi Replicas for my personal amp builds...
Image

Post Reply