Page 1 of 1

Mercury Magnetics P4550JT-G2

Posted: Wed Jan 31, 2007 9:39 pm
by VelvetGeorge
MM P4550JT-G2. intended for JTM 45 and 50 watts.

Posted: Wed May 09, 2007 5:44 pm
by VelvetGeorge
It seems that MM has changed to terminals for some of the wires on this PT.

Here are a pic and a diagram for the new version.


george

Re: Mercury Magnetics P4550JT-G2

Posted: Mon Sep 22, 2008 12:58 pm
by VelvetGeorge
With regard to our JTM 45 kit:

Select the correct color primary wire for your operating voltage.

BLACK 117V

BROWN 220V

RED 230V

YELLOW 240V

The terminal labeled "COM" will replace the orange wire indicated in the instructions.

Terminals 9,10 and 11 correlate to the green heater wires. With 10 being the center tap which gets grounded.

Terminals 12 and 13 correlate to the yellow rectifier heater wires.

Terminals 6,7 and 8 correlate to the red high voltage wires. With 7 being the CT which goes to the fuse holder and then to ground.


George