68 12xxx Channels

axeman · Post by **axeman** » Fri Oct 03, 2008 8:02 am

Hi Guys. Are channel 1 and 2 in a 68 interactable with each other without a patch cable?
Are they internally bridged?

Thanks

Axeman

Flames1950 · Post by **Flames1950** » Fri Oct 03, 2008 8:58 pm

The channels are interactive, but it's through the way they mix together -- it's not the same as being bridged with a patch cable. You'll hear some differences in gain and tone as you turn the unused volume control up and down.

axeman · Post by **axeman** » Sat Oct 04, 2008 1:33 am

I am not able to bridge them together. They interact with each other allready.

neikeel · Post by **neikeel** » Sat Oct 04, 2008 5:10 am

Did you build it?

If not do you have a good picture of how it is wired.

It is certainly possible to bridge internally but don't understand why you should need to- it takes some of the flexibility away...............

axeman · Post by **axeman** » Sat Oct 04, 2008 3:13 pm

I used the BillyBatz Layout

Metropoulos Forum

68 12xxx Channels

68 12xxx Channels

Re: 68 12xxx Channels

Re: 68 12xxx Channels

Re: 68 12xxx Channels

Re: 68 12xxx Channels