New Zero Loss FX loop Rev 4 - now available, and on sale!
Moderator: VelvetGeorge
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
New Zero Loss FX loop Rev 4 - now available, and on sale!
Happy to announce the new revision of the Zero Loss Loop. Rev 4 adds level switching on board.
These loops are on sale until Wed December 2nd. $65 each represents $20 off per kit!
george
These loops are on sale until Wed December 2nd. $65 each represents $20 off per kit!
george
-
- New Member
- Posts: 2
- Joined: Wed Aug 27, 2014 10:47 am
- Just the numbers in order: 13492
Re: New Zero Loss FX loop Rev 4 - now available, and on sale
Are the mounting dimensions (spacing between jacks, etc.) the same as previous versions?
-
- Senior Member
- Posts: 1644
- Joined: Sun Feb 26, 2006 6:24 am
- Just the numbers in order: 13492
- Location: MI
- Contact:
Re: New Zero Loss FX loop Rev 4 - now available, and on sale
Yesstormbringer wrote:Are the mounting dimensions (spacing between jacks, etc.) the same as previous versions?
-
- New Member
- Posts: 2
- Joined: Wed Aug 27, 2014 10:47 am
- Just the numbers in order: 13492
Re: New Zero Loss FX loop Rev 4 - now available, and on sale
Nice. I just ordered three...
- Did J
- Senior Member
- Posts: 165
- Joined: Tue Nov 09, 2010 4:23 pm
- Just the numbers in order: 13492
- Location: Remember Paris
Re: New Zero Loss FX loop Rev 4 - now available, and on sale
Thanks to you George and Steve ;^) Just ordered one for my next project
-
- New Member
- Posts: 18
- Joined: Thu Jun 17, 2010 11:28 am
- Just the numbers in order: 7
Re: New Zero Loss FX loop Rev 4 - now available, and on sale!
I recently picked one up and putting in a new build. I want to add a return pot and use it as a "global master".
Is there any changes I need to make to the board and/or what value pot to use?
Thanks in advance.
Is there any changes I need to make to the board and/or what value pot to use?
Thanks in advance.
-
- Senior Member
- Posts: 1644
- Joined: Sun Feb 26, 2006 6:24 am
- Just the numbers in order: 13492
- Location: MI
- Contact:
Re: New Zero Loss FX loop Rev 4 - now available, and on sale!
Sorry for late reply, wasn't able to log in here for a while.rmroza wrote:I recently picked one up and putting in a new build. I want to add a return pot and use it as a "global master".
Is there any changes I need to make to the board and/or what value pot to use?
Thanks in advance.
For a typical install as you intend in a Marshall-like amp, no board changes needed. Just add (or use existing/re-purposed if available) 1 Meg Audio/Log pot right after/following the loop for your global master.
-
- New Member
- Posts: 13
- Joined: Sat Jan 12, 2013 10:00 pm
- Just the numbers in order: 13492
Re: New Zero Loss FX loop Rev 4 - now available, and on sale!
Just bought one for my Soldano Astroverb. I had already installed a Mojotone kit but I think the Metro kit sounds better based on past experience. Anybody want a used Mojo kit? <I kid>
Thanks guys! -Frank
Thanks guys! -Frank