Can anyone tell me what size the bushing is (8mm or 3/8") on the Alpha dual pot in the LatMar MV kit? I've ordered the loop kit and MV kit but they are not here yet. Need to order some other parts for a build and would like all the pots to match.
Thanks!
Deric
Alph Pot Bushing Size
Moderator: VelvetGeorge
-
Deric
- New Member
- Posts: 18
- Joined: Sun Jan 30, 2011 10:24 pm
- Just the numbers in order: 7
-
robert
- Senior Member
- Posts: 862
- Joined: Wed Jul 19, 2006 4:15 am
- Just the numbers in order: 7
- Location: Bancrupt Euroland (Germany)
Re: Alph Pot Bushing Size
It's 3/8", especially you live in the US 
BTW: there are different Alpha bushing diameter sizes available (e.g. TubeTown here in Germany sells the 8mm Version only , but TAD sells the "correct" 3/8" version).
Regards
Robert
BTW: there are different Alpha bushing diameter sizes available (e.g. TubeTown here in Germany sells the 8mm Version only , but TAD sells the "correct" 3/8" version).
Regards
Robert
-
Deric
- New Member
- Posts: 18
- Joined: Sun Jan 30, 2011 10:24 pm
- Just the numbers in order: 7
Re: Alph Pot Bushing Size
Thank you!! 
-
Deric
- New Member
- Posts: 18
- Joined: Sun Jan 30, 2011 10:24 pm
- Just the numbers in order: 7
Re: Alph Pot Bushing Size
Well, for the record, the dual gang pot in the LarMar MV kit I just received is 8mm.