Hi,
I found this site while I was looking for some info on the PPIMV mods for a 1959 SLP. However - it seems that the kits aren't being sold here anymore. IS there a reason for this? - will they be coming back?
Thanks
PPIMV kits
Moderator: VelvetGeorge
-
djr_1
- New Member
- Posts: 1
- Joined: Wed Feb 15, 2012 6:43 am
- Just the numbers in order: 7
-
myfoot
Re: PPIMV kits
I think it was because George couldn't source the correct knob for the dual pot.
-
reswot
- Senior Member
- Posts: 106
- Joined: Fri Nov 13, 2009 9:54 pm
- Just the numbers in order: 7
Re: PPIMV kits
You can buy the parts (except maybe the knob?) from suppliers like AES or Mouser.
It's just a ganged pot and a couple of resistors. You don't need the shielded cable if it's a fairly short run and you twist the wires well.
If you absoultely have to get the shielded cable, it's out there, as well. I can't remember the name of the place where I bought some, but I got something like 10 feet for around $12.
It's just a ganged pot and a couple of resistors. You don't need the shielded cable if it's a fairly short run and you twist the wires well.
If you absoultely have to get the shielded cable, it's out there, as well. I can't remember the name of the place where I bought some, but I got something like 10 feet for around $12.
-
ValveStorm
- Supporting Advertiser
- Posts: 250
- Joined: Wed Mar 16, 2011 5:31 am
- Just the numbers in order: 7
- Contact:
Re: PPIMV kits
You can buy the parts ala carte here:
LarMar Master Volume:
http://valvestorm.com/Amp%20Mods/LarMar
PPIMV:
http://valvestorm.com/Amp%20Mods/PPIMV
LarMar Master Volume:
http://valvestorm.com/Amp%20Mods/LarMar
PPIMV:
http://valvestorm.com/Amp%20Mods/PPIMV
ValveStorm.comParts, parts parts!