Hi there,
this is Flavio from Italy!
I'm quite novice in modding my amp and I've succesfully installed a PPIMV a few months ago.
Now it's time to get an FX Loop but suddenly a question...
What if I use my amp live/reharsal at about 1/2 PPIMV and treble ch. at 8?
Is the loop working fine acting as it also with that much PI distortion?
I'd like to put some time based effects (delays/revs) a pseudo leslie (strymon Lex) and a little vol boost just to cut through during solos and stuff and I fear that I'll get some troubles getting clear sounds out of it...
Can someone help me clarify this?
Cheers and Best regards from Milan, Italy
Flavio
1959HW PPIMV & Zero Loss FX Loop Placement
Moderator: VelvetGeorge
-
- New Member
- Posts: 1
- Joined: Fri Nov 16, 2012 8:26 am
- Just the numbers in order: 13492
-
- New Member
- Posts: 5
- Joined: Wed Feb 03, 2016 5:16 am
- Just the numbers in order: 13492
Re: 1959HW PPIMV & Zero Loss FX Loop Placement
sorry for resurrecting the post, but I just installed a Zero loss on a 59 with a PPIMV and when using the MV the effects distort as well... any way to solve this?