Zero Loss FX loop kit with Mojotone Studio One: Schematic Included

Discuss your builds of MetroAmp Kits.

Moderator: VelvetGeorge

Post Reply
dlblumberg
New Member
Posts: 2
Joined: Sun Mar 10, 2019 10:40 pm
Just the numbers in order: 13492

Zero Loss FX loop kit with Mojotone Studio One: Schematic Included

Post by dlblumberg » Mon Mar 11, 2019 3:15 am

Hi, This is a follow up to my earlier post with schematic included. I'm trying to determine whether the loop will work with this 1 Watt kit from Mojotone. I'm fairly sure I can properly power the loop from the filter caps. My main concern is where to tap the signal and any other issues I should be aware of. I've attached the schematic and placed a red dot at the point I was guessing would be best for the signal tap. Can someone please advise whether I'm on the right track or if this is even possible? Thank you so much.

David

Post Reply