Zero Loss FX loop kit with Mojotone Studio One: Schematic Included
Posted: Mon Mar 11, 2019 3:15 am
Hi, This is a follow up to my earlier post with schematic included. I'm trying to determine whether the loop will work with this 1 Watt kit from Mojotone. I'm fairly sure I can properly power the loop from the filter caps. My main concern is where to tap the signal and any other issues I should be aware of. I've attached the schematic and placed a red dot at the point I was guessing would be best for the signal tap. Can someone please advise whether I'm on the right track or if this is even possible? Thank you so much.
David
David