Yes, went back to the lower filtering on the screens and the mains as it was before. At idle/no playing seems to have quite a bit of noise and maybe even a little howling wind sound, should I go back to stock on the screens and mains? Do you still hear the problem that you heard earlier and were trying to get rid of with 100 on the V3 cap?rockstah wrote:looking good. sounds good. i like the second clip as well. nice playing too.
so yer filtering is 32u on the mains? i thought u were going to go back to 50u on the mains and 100u screens?
Calling Rockstah - 1959 HW to 12xxx series spec
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 595
- Joined: Wed Nov 22, 2006 9:47 pm
- Location: Heart Of America
- Contact:
My first project: 1959HW to 12xxx Courtesy of the Late Great Rockstah a.k.a. Edward Van Abrahamian
- rockstah
- Senior Member
- Posts: 12481
- Joined: Thu Sep 15, 2005 12:28 pm
- Just the numbers in order: 7
- Location: Austin Texas
i didn't hear it in these clips as much and the 220k i didn't even notice it.
ya know i was just thinking u have to remember also that eds tone was the stuff he put in front of the amp.
u need to get a boss ge10. it will give you some gain and enable to shape your tone as well.
u might get one and be like "shit I'm done! this sounds great" -
i love mine.
ya know i was just thinking u have to remember also that eds tone was the stuff he put in front of the amp.
u need to get a boss ge10. it will give you some gain and enable to shape your tone as well.
u might get one and be like "shit I'm done! this sounds great" -
i love mine.
-
- Senior Member
- Posts: 595
- Joined: Wed Nov 22, 2006 9:47 pm
- Location: Heart Of America
- Contact:
I already have one (GE10 that is)! I will try it tomorrow!rockstah wrote:i didn't hear it in these clips as much and the 220k i didn't even notice it.
ya know i was just thinking u have to remember also that eds tone was the stuff he put in front of the amp.
u need to get a boss ge10. it will give you some gain and enable to shape your tone as well.
u might get one and be like "shit I'm done! this sounds great" -
i love mine.
And I'm ordering one of these New MXR custom shop CSP-026 - 1974 reissue Phase 90's as well.
MXR '74 Reissue Phase 90
Coveted by both players and collectors
Last edited by vkaxeman on Fri Feb 22, 2008 11:55 pm, edited 2 times in total.
My first project: 1959HW to 12xxx Courtesy of the Late Great Rockstah a.k.a. Edward Van Abrahamian
-
- Senior Member
- Posts: 595
- Joined: Wed Nov 22, 2006 9:47 pm
- Location: Heart Of America
- Contact:
-
- Senior Member
- Posts: 595
- Joined: Wed Nov 22, 2006 9:47 pm
- Location: Heart Of America
- Contact:
Just ordered the MXR 74 Custom Shop CSP026 Phase 90....
http://www.vwallguitars.com/index.php?a ... 0a8498851c
- - - - - -
Was gonna by the real deal but those are going for around $250.00 to $300.00 and most of them look a little beat up to boot.
http://www.vwallguitars.com/index.php?a ... 0a8498851c
- - - - - -
Was gonna by the real deal but those are going for around $250.00 to $300.00 and most of them look a little beat up to boot.
My first project: 1959HW to 12xxx Courtesy of the Late Great Rockstah a.k.a. Edward Van Abrahamian
-
- Senior Member
- Posts: 595
- Joined: Wed Nov 22, 2006 9:47 pm
- Location: Heart Of America
- Contact:
Ah, THanks! I will swap em out and see if it goes away.neikeel wrote:That sound is usually a duff preamp tube.vkaxeman wrote: At idle/no playing seems to have quite a bit of noise and maybe even a little howling wind sound
My first project: 1959HW to 12xxx Courtesy of the Late Great Rockstah a.k.a. Edward Van Abrahamian
-
- Senior Member
- Posts: 595
- Joined: Wed Nov 22, 2006 9:47 pm
- Location: Heart Of America
- Contact:
MP3's with the GE10:
C414mic
http://www.soundclick.com/player/single ... 97892&q=hi
SM57 mic
http://www.soundclick.com/player/single ... 97923&q=hi
Same clip as above SM57 mic but verb added.....a little too much maybe
http://www.soundclick.com/player/single ... 97996&q=hi
Stereo w/Verb C414mic - Guitar on one side only
http://www.soundclick.com/player/single ... 97926&q=hi
Main Soundclick page if above links do not work:
http://www.soundclick.com/bands/default ... dID=717849
Going to change out the choke now. Make some MP3's
This is FUN!!!!
C414mic
http://www.soundclick.com/player/single ... 97892&q=hi
SM57 mic
http://www.soundclick.com/player/single ... 97923&q=hi
Same clip as above SM57 mic but verb added.....a little too much maybe
http://www.soundclick.com/player/single ... 97996&q=hi
Stereo w/Verb C414mic - Guitar on one side only
http://www.soundclick.com/player/single ... 97926&q=hi
Main Soundclick page if above links do not work:
http://www.soundclick.com/bands/default ... dID=717849
Going to change out the choke now. Make some MP3's
This is FUN!!!!
My first project: 1959HW to 12xxx Courtesy of the Late Great Rockstah a.k.a. Edward Van Abrahamian
-
- Senior Member
- Posts: 1774
- Joined: Fri Jul 27, 2007 2:26 pm
- rockstah
- Senior Member
- Posts: 12481
- Joined: Thu Sep 15, 2005 12:28 pm
- Just the numbers in order: 7
- Location: Austin Texas
sounds good. of course u can tweak your sound alittle with the eq and adjust the level to taste. that eq makes a huge difference.
i think what we keep hearing as some kind of oscillation maybe due to the speakers used. i think a big part of it now is the speakers.
which choke r u suing and which choke r u going to try?
i think what we keep hearing as some kind of oscillation maybe due to the speakers used. i think a big part of it now is the speakers.
which choke r u suing and which choke r u going to try?
-
- Senior Member
- Posts: 595
- Joined: Wed Nov 22, 2006 9:47 pm
- Location: Heart Of America
- Contact:
I put just finished putting in a Mar 100 C.rockstah wrote:sounds good. of course u can tweak your sound alittle with the eq and adjust the level to taste. that eq makes a huge difference.
i think what we keep hearing as some kind of oscillation maybe due to the speakers used. i think a big part of it now is the speakers.
which choke r u suing and which choke r u going to try?
The Mar 100 C has a different foot print than the stock Choke (Dagnall INDT-00018) so I could only get 1 bolt through the hole in the Mar 100 C frame.
Here is my GE10 and the settings I used for the recordings:
See posts below for MP3's of the MAR 100-C.
Last edited by vkaxeman on Sat Feb 23, 2008 5:32 pm, edited 4 times in total.
My first project: 1959HW to 12xxx Courtesy of the Late Great Rockstah a.k.a. Edward Van Abrahamian