S.I.R. 100W SuperLead Schematic pt. II

[dukeamps]

https://www.youtube.com/watch?v=oWkQhvUhpUc

Excellent tone!

Thank you

[CoffeeTones]

39+34 = 36

Got the extra tube installed along with the rest of the circuit and 2nd gain pot. Modified the presence. It sounds good. Got a little tweaking to do as usual, but I tried to make a good guess at it, LOL. Using the #34, #39 schemes and your first spec.

[Unique]

39+34 = 36

Got the extra tube installed along with the rest of the circuit and 2nd gain pot. Modified the presence. It sounds good. Got a little tweaking to do as usual, but I tried to make a good guess at it, LOL. Using the #34, #39 schemes and your first spec.

Can't wait to hear some clips!

[Osbmxer1968]

Is imageshack not working anymore? Seems like everytime I click on a link to see a pic/ schematic, nothing comes up

[dukeamps]

39+34 = 36

Got the extra tube installed along with the rest of the circuit and 2nd gain pot. Modified the presence. It sounds good. Got a little tweaking to do as usual, but I tried to make a good guess at it, LOL. Using the #34, #39 schemes and your first spec.

Did you get it ?

[CoffeeTones]

Have not put the bypass caps on stage 2 and 3 yet. Got a bunch of .1uF, .22uF and .47uF caps laid out that I plan to solder to gator clips today. Had to pause and install a set of Bare Knuckles in my son's 8 string, LOL

[dukeamps]

Have not put the bypass caps on stage 2 and 3 yet. Got a bunch of .1uF, .22uF and .47uF caps laid out that I plan to solder to gator clips today. Had to pause and install a set of Bare Knuckles in my son's 8 string, LOL

Just do a 34 + an extra stage resistor to tune the gain, set everything to about 7, MV to whatever you like.

[CoffeeTones]

I will do that. I'll try to get a clip with my phone. That is the best I can do for now. Never recorded with this phone, so wish me luck. I have a 1k // cap on stage 4 from the previous spec, so may go ahead and change that to 820r // cap.

[CoffeeTones]

Some short, really rough phone clips. Please don't expect them to be as good as Nigel's recording or playing! I was sitting about six feet from the amp. Yeah, my timing and phrasing are off and there are clams. I have not played this stuff in a year or more, but I know it's wrong. There are no plate snubbers being used and no 150k gain reduction, hence it's a little unruly and the noise floor is up. I still have three or four changes to make before the spec is complete, but thought I'd post clips along the way.

https://drive.google.com/file/d/15dTeOt ... sp=sharing

https://drive.google.com/file/d/1IQcQK0 ... sp=sharing

[dukeamps]

Some short, really rough phone clips. Please don't expect them to be as good as Nigel's recording or playing! I was sitting about six feet from the amp. Yeah, my timing and phrasing are off and there are clams. I have not played this stuff in a year or more, but I know it's wrong. There are no plate snubbers being used and no 150k gain reduction, hence it's a little unruly and the noise floor is up. I still have three or four changes to make before the spec is complete, but thought I'd post clips along the way.

https://drive.google.com/file/d/15dTeOt ... sp=sharing

https://drive.google.com/file/d/1IQcQK0 ... sp=sharing

Links dont work.

[CoffeeTones]

I'll have to see why they were not public. May be for the best, they were rough. LOL

I'll make more clips. I just finished the complete mod. Might need to fine tune stage 3. Have not decided if it needs more gain or more clipping.

[dukeamps]

https://soundclick.com/share.cfm?id=14400653

Clip recorded with 2 mics, Sh MD421 + SM57

[dukeamps]

https://youtu.be/ZMSiSQEVJ8E

[dukeamps]

My first ever go at doing a Kemper profile lol
The tone gets changed a bit, but i think that's to do with my reamp box, i need a better one.

https://soundclick.com/share.cfm?id=14401073

[dukeamps]

https://soundclick.com/share.cfm?id=14401084

Some random playing not AFD lol