JTM45/100 progress pics
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 233
- Joined: Tue Sep 09, 2008 10:48 pm
JTM45/100 progress pics
More progress shots. Fired it up today - no real issues. Sounds fantastic.
Only needs a bit of a clean up & the cabinet finishing.
Metro bare bones JTM45/100 chassis kit. Front panel from Ceriatone, Turret boards from Brian at repro turret boards, erie, lemmco's & mustards from Sparky, T/F's from Brian Wallace - Marstran, Snubber cap & decals (decals yet to be applied) from S. Marshall & lots of advice from Thousandshirts.
Anyhow
Thanks all.
Wayne
Only needs a bit of a clean up & the cabinet finishing.
Metro bare bones JTM45/100 chassis kit. Front panel from Ceriatone, Turret boards from Brian at repro turret boards, erie, lemmco's & mustards from Sparky, T/F's from Brian Wallace - Marstran, Snubber cap & decals (decals yet to be applied) from S. Marshall & lots of advice from Thousandshirts.
Anyhow
Thanks all.
Wayne
- Attachments
-
- Picture 013.jpg (128.06 KiB) Viewed 3202 times
-
- Picture 011.jpg (135.36 KiB) Viewed 3202 times
-
- Picture 008.jpg (114.98 KiB) Viewed 3199 times
-
- Picture 007.jpg (118.58 KiB) Viewed 3199 times
-
- Picture 006.jpg (149.2 KiB) Viewed 3199 times
-
- Picture 003.jpg (150.89 KiB) Viewed 3195 times
-
- Picture 001.jpg (148.27 KiB) Viewed 3188 times
- Flames1950
- Senior Member
- Posts: 9294
- Joined: Sun Feb 08, 2004 1:04 am
- Location: Waukee, Iowa
Re: JTM45/100 progress pics
Don't you shake everything off the shelves behind the drums when the band gets going???
-
- Senior Member
- Posts: 1774
- Joined: Fri Jul 27, 2007 2:26 pm
Re: JTM45/100 progress pics
Looks great, Wayne!
- Big Mike
- Senior Member
- Posts: 796
- Joined: Tue Oct 31, 2006 12:42 am
- Just the numbers in order: 7
- Location: East Bay California - Raider Nation
Re: JTM45/100 progress pics
Fantastic!
Metroamp kit JMP50 - CM OT
Metroamp JTM45 turned JMP50 w/Classictone OT
Marshall 2550 Jubilee
Powered by Thorn and Kauer guitars
Scumback Speakers
Metroamp JTM45 turned JMP50 w/Classictone OT
Marshall 2550 Jubilee
Powered by Thorn and Kauer guitars
Scumback Speakers
- Doug H
- Senior Member
- Posts: 929
- Joined: Tue Jan 22, 2008 2:56 pm
- Location: Canada
Re: JTM45/100 progress pics
man I'm never going to post mine when I get it done lol, beautiful build.
-
- Senior Member
- Posts: 250
- Joined: Wed Oct 08, 2008 11:01 am
- Just the numbers in order: 7
- Location: Brumunddal, Norway
Re: JTM45/100 progress pics
Nice! Im starting my build very soon!
Nice turret boards! ive also ordered from BrianH!
Nice turret boards! ive also ordered from BrianH!
Metroamp builds : 68` 50w (x2), 69` 100w, 68` 100w 12xxx (x3), JTM45/100, JTM50(x2), 2203
-
- Senior Member
- Posts: 166
- Joined: Sun Jun 07, 2009 9:05 pm
- Just the numbers in order: 7
Re: JTM45/100 progress pics
The cab actually looks cool uncovered like that.
But a proper tolex job would do that amp justice.
The 45/100 is my dream amp.
But a proper tolex job would do that amp justice.
The 45/100 is my dream amp.
- Big Mike
- Senior Member
- Posts: 796
- Joined: Tue Oct 31, 2006 12:42 am
- Just the numbers in order: 7
- Location: East Bay California - Raider Nation
Re: JTM45/100 progress pics
How do you get your component legs so strait? I look at yours, Will's, etc. And I"m jealous. LOL
Metroamp kit JMP50 - CM OT
Metroamp JTM45 turned JMP50 w/Classictone OT
Marshall 2550 Jubilee
Powered by Thorn and Kauer guitars
Scumback Speakers
Metroamp JTM45 turned JMP50 w/Classictone OT
Marshall 2550 Jubilee
Powered by Thorn and Kauer guitars
Scumback Speakers
-
- Senior Member
- Posts: 1774
- Joined: Fri Jul 27, 2007 2:26 pm
Re: JTM45/100 progress pics
Roll 'em gently on a flat surface, one side at a time.Big Mike wrote:How do you get your component legs so strait? I look at yours, Will's, etc. And I"m jealous. LOL
- Big Mike
- Senior Member
- Posts: 796
- Joined: Tue Oct 31, 2006 12:42 am
- Just the numbers in order: 7
- Location: East Bay California - Raider Nation
Re: JTM45/100 progress pics
Cool, I'll try that next build, thanks.
Metroamp kit JMP50 - CM OT
Metroamp JTM45 turned JMP50 w/Classictone OT
Marshall 2550 Jubilee
Powered by Thorn and Kauer guitars
Scumback Speakers
Metroamp JTM45 turned JMP50 w/Classictone OT
Marshall 2550 Jubilee
Powered by Thorn and Kauer guitars
Scumback Speakers
-
- Senior Member
- Posts: 233
- Joined: Tue Sep 09, 2008 10:48 pm
Re: JTM45/100 progress pics
Thanks for the kind words guys.
It has turned out to be my best build so far ! I really love this thing. Can't wait for it to "run in" a bit.
It's dead quiet - no hum or buzz.
I used the standard marshall earthing too - pot bus etc.
Brians Turret Boards are fantastic & make all the difference.
Mike - Will (thousand shirts) is right. I use two steel rulers. One laid down on the edge of my work bench. Then place the component lead on this ruler and use the other ruler to gentle role the lead between the two. Works perfectly.
Flames - the stuff on the shelves behind the drums does move around a bit when we crank things up. Biggest issue is my friendly neighbours though. I have had the police around here before - so we don't make to much noise here anymore
Got a day off today - so it's cabinet time !
Will post pics when done.
Thanks
Wayne
It has turned out to be my best build so far ! I really love this thing. Can't wait for it to "run in" a bit.
It's dead quiet - no hum or buzz.
I used the standard marshall earthing too - pot bus etc.
Brians Turret Boards are fantastic & make all the difference.
Mike - Will (thousand shirts) is right. I use two steel rulers. One laid down on the edge of my work bench. Then place the component lead on this ruler and use the other ruler to gentle role the lead between the two. Works perfectly.
Flames - the stuff on the shelves behind the drums does move around a bit when we crank things up. Biggest issue is my friendly neighbours though. I have had the police around here before - so we don't make to much noise here anymore
Got a day off today - so it's cabinet time !
Will post pics when done.
Thanks
Wayne
- cole
- Senior Member
- Posts: 752
- Joined: Mon Jul 17, 2006 1:25 pm
- Just the numbers in order: 13492
- Location: St. John's Newfoundland, CANADA
Re: JTM45/100 progress pics
Beautiful, beautiful job! What a gorgeous build!!!
Congrats on this one!
Congrats on this one!
Les Paul Classic, Les Paul Standard Faded, Fender American Strat
Jackson Custom Shop Strat s/n 1226
JMP 2203, JCM 800 2205, Metro JTM 45
Metropoulos '68 12 Series s/n 12026
Marshall 1960 A/B 4 X 12's
Jackson Custom Shop Strat s/n 1226
JMP 2203, JCM 800 2205, Metro JTM 45
Metropoulos '68 12 Series s/n 12026
Marshall 1960 A/B 4 X 12's
-
- Senior Member
- Posts: 250
- Joined: Wed Oct 08, 2008 11:01 am
- Just the numbers in order: 7
- Location: Brumunddal, Norway
Re: JTM45/100 progress pics
Clean and tidy build! My 45/100 wont be that good looking !
Metroamp builds : 68` 50w (x2), 69` 100w, 68` 100w 12xxx (x3), JTM45/100, JTM50(x2), 2203
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
- axeman
- Senior Member
- Posts: 2464
- Joined: Wed Apr 02, 2008 1:21 pm
- Just the numbers in order: 7
- Location: Los Angeles
- Contact:
Re: JTM45/100 progress pics
Wow, looks great.