Been working on my build piece by piece, and I ran out of hardware for mounting the selectors on the backplate.
Does anyone know what kind of screws they are?
And while I am at it, what did/do you guys use to hold the indicator light in place?
If anyone cares about where I'm at, I'm starting to wire up everything. Unfortunatley, I cracked the faceplate twice last night while mounting the pots.
I think I'm going to have to build another amp to redeem myself.
Hardware
Moderator: VelvetGeorge
- Xplorer
- Senior Member
- Posts: 2473
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: Hardware
i think that neikeel may have this type of screws.
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
Re: Hardware
Yes I have the correct BA screws and a spare light 'gripper' too.
postage from UK is a bit of a drag so have you looked at Valvestorm he has lots of stuff.
postage from UK is a bit of a drag so have you looked at Valvestorm he has lots of stuff.
Neil
-
- Senior Member
- Posts: 307
- Joined: Mon Feb 22, 2010 12:11 am
- Just the numbers in order: 7
- Location: Livermore, CA
Re: Hardware
Valvestorm stuff is on its way.neikeel wrote:Yes I have the correct BA screws and a spare light 'gripper' too.
postage from UK is a bit of a drag so have you looked at Valvestorm he has lots of stuff.
~Current Amps~
1. 1963 Sano Supersonic
2. 1990s Fender Dual Showman
3.JTM45/100 Build
~Future Amps~
1. 69 Superlead
2. Lots of Metropoulos amps
1. 1963 Sano Supersonic
2. 1990s Fender Dual Showman
3.JTM45/100 Build
~Future Amps~
1. 69 Superlead
2. Lots of Metropoulos amps
-
- New Member
- Posts: 1
- Joined: Tue Jan 31, 2012 10:29 pm
- Just the numbers in order: 7
Re: Hardware
I also think so.Xplorer wrote:i think that neikeel may have this type of screws.
- novosibir
- Senior Member
- Posts: 4654
- Joined: Tue Nov 22, 2005 2:32 pm
- Just the numbers in order: 7
- Location: Nuernberg, Germany
- Contact:
Re: Hardware
Interesting thoughts!stefani88 wrote:I also think so.Xplorer wrote:i think that neikeel may have this type of screws.
Give us more!
Larry
The fault almost always is sitting in front of the amp
Larry's Website now with included Pix's Gallery
Larry's Website now with included Pix's Gallery