Hi. I got a question regarding the far left cap on the following layout by gutpile
http://s64.photobucket.com/albums/h174/ ... Layout.jpg" onclick="window.open(this.href);return false;.
I got a 220uF 25V for this position, is it safe? I'm concerned because the cap I've got is barely bigger than a 1W AB NOS CC resistor while every JTM45/100 build I've seen got a big one there, almost as big as the preamp cap in the center of the board, even though I'm not sure about the voltage rating on those caps. Thanks for the info!
Cap question
Moderator: VelvetGeorge
-
BoogieEngineer
- Senior Member
- Posts: 227
- Joined: Sat Jun 30, 2012 1:53 am
- Just the numbers in order: 13492
- Location: La Jolla, CA
-
toner
- Senior Member
- Posts: 2582
- Joined: Sun Dec 03, 2006 7:57 pm
- Location: Iowa
-
BoogieEngineer
- Senior Member
- Posts: 227
- Joined: Sat Jun 30, 2012 1:53 am
- Just the numbers in order: 13492
- Location: La Jolla, CA
Re: Cap question
Thanks buddy!
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: Cap question
original is even 250uf 6v.
i've got a sprague 250uf 6v for this cap. they also look like the original wimas.
i've got a sprague 250uf 6v for this cap. they also look like the original wimas.