JCM800 build, sounds great.
Both cliff mono-speaker jacks work by themselves. I can plug into jack 1 or 2 and they each work by themselves.
If both are used, the second jack does not work, only the first one passes signal.
They both appear to be wired correctly.
Probably something simple.
Added pic. Ground is behind orange wire.
Cliff speaker jack problem
Moderator: VelvetGeorge
-
sonofmickel
- New Member
- Posts: 23
- Joined: Wed Feb 04, 2009 3:39 am
Cliff speaker jack problem
Last edited by sonofmickel on Mon Oct 19, 2015 3:03 pm, edited 2 times in total.
-
Doug H
- Senior Member
- Posts: 929
- Joined: Tue Jan 22, 2008 2:56 pm
- Location: Canada
Re: Cliff speaker jack problem
sounds like you daisy chained the ground wire.
-
sonofmickel
- New Member
- Posts: 23
- Joined: Wed Feb 04, 2009 3:39 am
Re: Cliff speaker jack problem
Fixed!
Loose connection using the "straight through" wiring technique.
I re-wired the output jacks "wrapping" the posts.
All good now.
Tip about wrapping the posts from Nik @ Ceriatone, I think he is just plain helpful.
Loose connection using the "straight through" wiring technique.
I re-wired the output jacks "wrapping" the posts.
All good now.
Tip about wrapping the posts from Nik @ Ceriatone, I think he is just plain helpful.