Hi guys
I want to make coupling cap channel 1 switchable from a .022 to a .0022. What voltage rating switch should I use?
Common ones at the electronics shop are 125v 6 amp
Please post to thread
Thanks. Dan
On/on switch specs
Moderator: VelvetGeorge
-
dan_tramble
- New Member
- Posts: 37
- Joined: Fri Dec 19, 2014 11:34 am
- Just the numbers in order: 13492
On/on switch specs
MetroAmp addict!
JTM 50/45,1987's & 1986
1959 and 2203/2204 Amps
1974 amp
Can't stop building, very addictive!
JTM 50/45,1987's & 1986
1959 and 2203/2204 Amps
1974 amp
Can't stop building, very addictive!
-
Roe
- Senior Member
- Posts: 5054
- Joined: Thu Apr 13, 2006 1:36 pm
- Just the numbers in order: 7
- Location: Drontheim. Norwegen
- Contact:
Re: On/on switch specs
Switch after the cap and it is no problem. Switching the anode is a bad idea, unless you find a switch rated for 500v DC
http://www.myspace.com/20bonesband" onclick="window.open(this.href);return false;
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39