Rocker power switch replacement question
Moderator: VelvetGeorge
- Dave Simpson
- New Member
- Posts: 32
- Joined: Wed Feb 21, 2007 9:22 am
- Location: Los Angeles
Rocker power switch replacement question
Greetings all! Sorry about the stupid question, but I figured I better ask before I tackle this repair. I have a replacement rocker power switch for my JCM800 2203 and it has four connections. The original switch has five connections. My question is which wire is not needed anymore and what should I do with the wire that's no longer needed?
Any advice would be greatly appreciated!
Any advice would be greatly appreciated!
- 77custom
- Senior Member
- Posts: 611
- Joined: Thu Mar 02, 2006 6:46 pm
- Location: Ohio
- Dave Simpson
- New Member
- Posts: 32
- Joined: Wed Feb 21, 2007 9:22 am
- Location: Los Angeles
-
- Senior Member
- Posts: 182
- Joined: Sun May 21, 2006 4:04 pm
- Location: London, England.
-
- Senior Member
- Posts: 182
- Joined: Sun May 21, 2006 4:04 pm
- Location: London, England.
- jerrydyer
- Senior Member
- Posts: 3347
- Joined: Fri Oct 15, 2004 6:13 pm
- Location: Westminster, CA
- Contact:
I was going to post Hoffman as well. Had that same dilema a while ago. Dougs cool
vids.
http://www.youtube.com/user/jerrydyer?feature=mhw4" onclick="window.open(this.href);return false;
http://www.dui-specialist.com" onclick="window.open(this.href);return false;
http://www.youtube.com/user/jerrydyer?feature=mhw4" onclick="window.open(this.href);return false;
http://www.dui-specialist.com" onclick="window.open(this.href);return false;
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
- novosibir
- Senior Member
- Posts: 4654
- Joined: Tue Nov 22, 2005 2:32 pm
- Just the numbers in order: 7
- Location: Nuernberg, Germany
- Contact:
Re: Rocker power switch replacement question
Thanks Neil!
I've kicked the spammer into nirvana forever and have deleted all his (3) posts.
Larry
I've kicked the spammer into nirvana forever and have deleted all his (3) posts.
Larry
The fault almost always is sitting in front of the amp
Larry's Website now with included Pix's Gallery
Larry's Website now with included Pix's Gallery