Page 1 of 1

On/on switch specs

Posted: Tue May 31, 2016 11:20 am
by dan_tramble
Hi guys

I want to make coupling cap channel 1 switchable from a .022 to a .0022. What voltage rating switch should I use?

Common ones at the electronics shop are 125v 6 amp

Please post to thread

Thanks. Dan

Re: On/on switch specs

Posted: Tue May 31, 2016 2:54 pm
by Roe
Switch after the cap and it is no problem. Switching the anode is a bad idea, unless you find a switch rated for 500v DC