****** PT wiring diagram
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 99
- Joined: Sat Jun 17, 2006 10:43 am
****** PT wiring diagram
Hi. Anyone have or know the wiring diagram for the ****** PT 100w T2562 Dagnall reproduction? Bought this a while back and getting around to using in a new build but cannot remember having a diagram for it.
-
- New Member
- Posts: 21
- Joined: Fri Jun 12, 2015 3:47 pm
- Just the numbers in order: 13492
- Location: Mississauga
- Contact:
Re: ****** PT wiring diagram
PRIMARY:
ORANGE= Neutral Common
WHITE/red stripe = 100V Japan
RED= 120V
BROWN= 220V
BLUE= 230V
PURPLE= 240V
SECONDARY:
THICK BLACK wires= 6.3V Heaters
THICK GREEN WIRE= Center-Tap for Heaters goes to ground...
BLACK and BLUE wires= High Voltage goes to diodes or stand-by .... 465V
BLACK/yellow and BLUE/yellow = High Voltage goes to diodes or stand-by ....500V
YELLOW= High Voltage Center-Tap ...goes between the first set of filter caps..
WHITE= bias
GREEN = ground for bias winding
There ya go!
ORANGE= Neutral Common
WHITE/red stripe = 100V Japan
RED= 120V
BROWN= 220V
BLUE= 230V
PURPLE= 240V
SECONDARY:
THICK BLACK wires= 6.3V Heaters
THICK GREEN WIRE= Center-Tap for Heaters goes to ground...
BLACK and BLUE wires= High Voltage goes to diodes or stand-by .... 465V
BLACK/yellow and BLUE/yellow = High Voltage goes to diodes or stand-by ....500V
YELLOW= High Voltage Center-Tap ...goes between the first set of filter caps..
WHITE= bias
GREEN = ground for bias winding
There ya go!