****** PT wiring diagram

Info for maintaining and tweaking your amp to perfection.

Moderator: VelvetGeorge

Post Reply
mdc1
Senior Member
Posts: 99
Joined: Sat Jun 17, 2006 10:43 am

****** PT wiring diagram

Post by mdc1 » Thu Jan 28, 2021 7:02 pm

Hi. Anyone have or know the wiring diagram for the ****** PT 100w T2562 Dagnall reproduction? Bought this a while back and getting around to using in a new build but cannot remember having a diagram for it.

Probably Loud
New Member
Posts: 21
Joined: Fri Jun 12, 2015 3:47 pm
Just the numbers in order: 13492
Location: Mississauga
Contact:

Re: ****** PT wiring diagram

Post by Probably Loud » Fri Feb 05, 2021 9:16 pm

PRIMARY:
ORANGE= Neutral Common
WHITE/red stripe = 100V Japan
RED= 120V
BROWN= 220V
BLUE= 230V
PURPLE= 240V

SECONDARY:
THICK BLACK wires= 6.3V Heaters
THICK GREEN WIRE= Center-Tap for Heaters goes to ground...
BLACK and BLUE wires= High Voltage goes to diodes or stand-by .... 465V
BLACK/yellow and BLUE/yellow = High Voltage goes to diodes or stand-by ....500V
YELLOW= High Voltage Center-Tap ...goes between the first set of filter caps..
WHITE= bias
GREEN = ground for bias winding


There ya go!

Post Reply