Page 1 of 1
****** PT wiring diagram
Posted: Thu Jan 28, 2021 7:02 pm
by mdc1
Hi. Anyone have or know the wiring diagram for the ****** PT 100w T2562 Dagnall reproduction? Bought this a while back and getting around to using in a new build but cannot remember having a diagram for it.
Re: ****** PT wiring diagram
Posted: Fri Feb 05, 2021 9:16 pm
by Probably Loud
PRIMARY:
ORANGE= Neutral Common
WHITE/red stripe = 100V Japan
RED= 120V
BROWN= 220V
BLUE= 230V
PURPLE= 240V
SECONDARY:
THICK BLACK wires= 6.3V Heaters
THICK GREEN WIRE= Center-Tap for Heaters goes to ground...
BLACK and BLUE wires= High Voltage goes to diodes or stand-by .... 465V
BLACK/yellow and BLUE/yellow = High Voltage goes to diodes or stand-by ....500V
YELLOW= High Voltage Center-Tap ...goes between the first set of filter caps..
WHITE= bias
GREEN = ground for bias winding
There ya go!