Zero Loss Loop noise

Info for maintaining and tweaking your amp to perfection.

Moderator: VelvetGeorge

Post Reply
warrenp099
New Member
Posts: 1
Joined: Fri Oct 29, 2021 7:40 am
Just the numbers in order: 13492

Zero Loss Loop noise

Post by warrenp099 » Mon Nov 22, 2021 8:07 am

I just installed the FX loop in my JTM45 clone. This is the one from StewMac (Mojotone)? Anyway, I have to run it on the +4 setting because the noise on the -20 setting is too much. I typically don't use the standby switch when turning on and off the amp but when I turn it off, it makes a terrible crackling sound if anything is plugged in the loop. Is this normal?
Thanks
Warren

Post Reply