Metropoulos Forum

Here is a list of techs and their locations to help people find resources when it comes to repairing, modding, restoring their old amps.


Techs: please inlclude your location, contact into, special skills, experience installing metroamp parts, bench charge, website ect.


george

VelvetGeorge wrote:Here is a list of techs and their locations to help people find resources when it comes to repairing, modding, restoring their old amps.


Techs: please inlclude your location, contact into, special skills, experience installing metroamp parts, bench charge, website ect.


george

Glad to help out where I can
I'm in Sarasota, Fl.



I install boards, trannys,and mods for your amp. I also perform repairs.
I have a lot of parts in Stock, including NOS Parts for restores or specialty buids. I do a nice clean job too, just ask George. He's seen my collection of builds. My specialty is 12000, JTM 45/100s, 10000s, and 1969 specs. I also install Guitar Electronics.

I charge 40 an hour bench repairs.
Call me at (941) 744-7322 for prices on everything else.

http://www.ampmonster.com/

I'm usually up to my ass in work, but I can help out - just for you George

Specialty is vintage Fenders, but I see it all.

Let's get BIZZZZAAAAHHHHHHHHHH!!!!!!!!!

- WOT

Thanks, you guys are top notch all the way.


VG

Http://Wallaceamps.com

Anything from Parts installation to restorations.

Livonia Michigan Area.

I'm happy to take on kits someone wants built or gets stuck on too. Installing George's boards and other parts is fine as well. It's not that I mind general repairs but with a toddler and a wife in adult college the turnaround time would be a little slow.........if that does not bother you I'm game, but if it's your main gigging amp I may just not be quick enough!!

I've built George's JTM45 and '69 Super Bass kits, as well as a Metro JTM45/100 clone and used many of George's parts in my Super PA repro. Worked on a number of black/silverface Fenders, some Marshall stuff, almost done with my Sound City........also built a couple of Weber kits too. (gasp) I did install one of George's boards in my '78 Marshall, but I'm the nut case that pu tthe PCB back in later!!!

I've also got a couple of kits here referred from George and a JTM45 from one of the forum members that should turn out killer!!

I'd also have to charge about $40/hour, but I confess to being a bit lenient on time, because if I wasn't building your amp George's store would be sucking me dry as I build more of my own!!

My email is down below, or PM me. I'm in Waukee Iowa (more or less a suburb of Des Moines anymore.)

Montreal Canada..........Getting some repair work from Vancouver up to here...

Build near 10 Metro amp now, good at tweaking Super Leads, anything regarding 1987, 1959, etc...

PM me with for quotes, etc....

Will help out with pleasure!!!

Oklahoma City is the shop location...

I have built everything George has sold. I do 45/100's, Bluesbreaker combo's 50 and 100 watt customs, '67s, 12XXX dual voltage, JTM45's, Super Bass, Super Leads...you name it...if it's an old Marshall or clone..I does it""....I'll even take on 5F6 Fender.

Contact me at mikef@katt.com

Bech charges depend on the scope of work...troubleshooting, Building, Designing and integrating, ect.

Jerry Dyer Southern California Orange County Huntington Beach Etc.
http://www.surrealamplification.com" onclick="window.open(this.href);return false;

Syracuse, NY, specialising in vintage Fender,Marshall and Ampeg. Any ptp or decent tag board amp with tubes is fair game,Gibbys,Guilds,Magnavox etc. Services include the usuall recap and retube as well as full restorations. I don't drill holes in chassis, any mods performed are 100% reversible. Contact me at Maschinenmann@hotmail.com

Toronto....

www.enforce.ca

amp & electric guitar repair/maintenance

I'll consider just about any crazy idea. Custom is king.

Dave Freidman out of LA is probably the best for any Marshall mods. Chris ****** is a very notable guy as well. Dave turned my 75' Marshall into a EVH Plexi monster and then some. The amp is so versatile and it looks nothing like a 75, more like a 68. He does work with Roy of Blankenship amps as well as Matt Bruck and EVH himself. I think Mark Cameron does pretty cool stuff as well.........

guitar and amp repair/mantence many years exp, with top manafactures in southern Ca, now located in southern Oklahoma 90 miles north of Dallas Tx, contact me at Welbornmusic.com thanks bluze81

Jerry Pinnelli FJA Mods in the Syracuse, NY area. I do it all on just about any brand as well as pedal and guitar repairs and mods.

Julien "Butt" Masson , FRANCE.

Anything from cadavers restorations to kits building etc. Amp maintenance, etc. Marshall, fender, voxes, hiwatts orange etc.
Not sure there are many french readers here but who knows