Vishay/Dale 2 Watt Resistors?

Dax-The-Ax · Post by **Dax-The-Ax** » Mon Nov 08, 2004 8:55 pm

I bought some 2 watt Vishay/Dale resistors from Mouser, but they are smaller in size than ones i got from George. I think they are Militrary/Industrial resistors. Does this sound right? here is a pic, the 2 watter is on the right.

Dax

Post by **VelvetGeorge** » Mon Nov 08, 2004 9:30 pm

Dax, those look awfully small to be 2 watts. Do you have the part # handy?

George

Dax · Post by **Dax** » Mon Nov 08, 2004 9:43 pm

That is my order below. The ID on the resistor is: Dale
CPF 2
100K 1% T1
0411

71-CPF2-F-100K 2 0.495 0.99
100K OHM 1% 100PPM
Vishay/Dale 2W Flameproof Metal Film Resistors

Dax · Post by **Dax** » Mon Nov 08, 2004 9:47 pm

Sorry, the resistor id is:

Dale
CPF 2
100K 1% T1
0418

Post by **VelvetGeorge** » Mon Nov 08, 2004 9:48 pm

That's strange, they do list them as 2 watts. Give them a shot, just keep an eye on them for the first 10 minutes or so.

George

5150loveeddie · Post by **5150loveeddie** » Mon Nov 08, 2004 10:36 pm

2 watts? taught they didn't have them..........let us know!!!

Dax · Post by **Dax** » Tue Nov 09, 2004 12:16 am

George, were the Vishays you sent me 1/2 watters? They seem pretty big.

Dax

Guest · Post by **Guest** » Tue Nov 09, 2004 12:18 am

Mouser has all values, i think, you can get 3 watters.

Post by **VelvetGeorge** » Tue Nov 09, 2004 12:30 am

Yes, they were 1/2 watts.

George

5150loveeddie · Post by **5150loveeddie** » Mon Nov 15, 2004 11:33 pm

Hey Dax! So are they 2watts or what..........

Dax · Post by **Dax** » Tue Nov 16, 2004 6:27 pm

Haven't really found out yet, was hoping you all would know!!